KrillKounter

Description

A utility for monitoring and logging block device stats to a JSON file at a regular time interval.

Dependencies

make-4.3
cmake-3.22.1
libjson-glib-dev-1.6.6
lsblk-2.37.2

Compilation

Clone this repo to a local directory using the following command, git clone https://github.com/The-Good-Penguin/tgp-krill-kounter.git
From inside the local repo directory, run the following command to create a build directory. cmake -S . -B build
From inside the local repo directory, run the following command to build the KrillKounter executable within the build/ subdirectory. cmake --build build

Installation

From inside the previously created build/ subdirectory, run the command sudo cmake --build . --target install. This will install the executable to /usr/bin/KrillKounter, and the systemd service file to /lib/systemd/system/KrillKounter.service.
KrillKounter can be configured by editing Enviroment values within /lib/systemd/system/KrillKounter.service;

KK_CONFIG_PATH - Path to the JSON file to be used for configuring the daemon in JSON instead of configuring via the variables below

KK_STATS_PATH - Path to the JSON file to be used for logging of block device stats and info.

KK_DEVICE_PATH - Path to the target block device to be monitored by KrillKounter [e.g. /dev/sda]

KK_DEVICE_NAME - Name of the target block device to be monitored by KrillKounter [e.g. sda]

KK_UPDATE_RATE - Time interval to wait between JSON file updates, in seconds.

Enable and start the KrillKounter systemd service using the following command systemctl enable --now KrillKounter.service. The state of the KrillKounter service can be monitored using the command systemctl status KrillKounter.

Config File Format

{
    "devices": [
        "/dev/sda",
        "/dev/mmcblk0"
    ],
    "updateRate": 3600,
    "statsFilePath": "/usr/share/KrillKounter/stats.json"
}

devices is an array of device paths you wish to monitor

Contributing

Issue a PR and follow the guidelines outlined in the CodingStyle.md