autoddvpn(pptp+wget)的VPN一直停留在“Let's wait for VPN being connected”
Opened this issue · 0 comments
GoogleCodeExporter commented
請描述一下您進行怎樣的操作之後碰到了問題
1.PPTP（做客户端）拨不上，一直显示：ALL DONE. Let's wait for VPN
being connected.
2.
3.
你期待是怎樣的結果，然而卻出現了什麼情形？
请问VPN拨不上的原因是什么，如何解决？
請提供以下資訊：
1. 您的路由器型號： TP-Link TL-WR941ND v4
2. DD-WRT版本： DD-WRT v24-sp2 (03/25/13) std
3. 您的作業系統： win7
4. 您的瀏覽器版本： ie8
5. autoddvpn的連線模式(pptp+wget, pptp+jffs, openvpn+jffs等)：
pptp+wget
6. autoddvpn的運行模式，傳統模式(classicMode)還是優雅模式(g
raceMode)：傳統模式(classicMode)
7. DD-WRT WAN口連線模式是 pptp or dhcp or static ：PPPOE
8. 運行autoddvpn之後DD-WRT 的命令輸出 # route -n | tail -n 20 ：
(以上1-8點必填，否則可能沒辦法即時協助你解決問題)
root@DD-WRT:~# route -n | tail -n 20
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 210.38.233.129 0.0.0.0 UG 0 0 0 ppp0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
210.38.233.129 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
root@DD-WRT:~#
如果方便的話，請參考這裡的說明，貼上autoddvpn.log內容
(說明：http://code.google.com/p/autoddvpn/wiki/DEBUG)
最後如果可能的話，請附上截屏或任何可能有幫助的夾檔
PPTP 一直拨不上：
root@DD-WRT:~# cat /tmp/autoddvpn.log
[INFO#1115] 01/Jan/1970:00:00:11 log starts
[INFO#1115] 01/Jan/1970:00:00:11 pptp+wget mode
[INFO#1115] 01/Jan/1970:00:00:11 getting vpnup.sh
[INFO#1115] 03/May/2014:10:01:42 getting vpndown.sh
[INFO#1115] 03/May/2014:10:01:43 modifying /tmp/pptpd_client/ip-up
[INFO#1115] 03/May/2014:10:01:43 /tmp/pptpd_client/ip-up not exists, sleep
10sec.
[INFO#1115] 03/May/2014:10:01:53 /tmp/pptpd_client/ip-up modified
[INFO#1115] 03/May/2014:10:01:53 modifying /tmp/pptpd_client/ip-down
[INFO#1115] 03/May/2014:10:01:53 /tmp/pptpd_client/ip-down modified
[INFO#1115] 03/May/2014:10:01:53 ALL DONE. Let's wait for VPN being connected.
root@DD-WRT:~#
Original issue reported on code.google.com by redbaron...@gmail.com on 3 May 2014 at 9:36