This is a set of bindings from libpcap to node as well as some useful libraries to decode, print, and
analyze packets. libpcap is a packet capture library used by programs like tcpdump and wireshark.
It has been tested on OSX and Linux.
node_pcap is useful for many things, but it does not yet understand all common protocols. Common reasons
to use this package are
http_trace, and
htracr.
There are already many tools for capturing, decoding, and analyzing packets. Many of them are thoroughly tested and very fast. Why would anybody want to do such low level things like packet capture and analysis in JavaScript? A few reasons:
-
JavaScript makes writing event-based programs very natural. Each packet that is captured generates an event, and as higher level protocols are decoded, they might generate events as well. Writing code to handle these events is much easier and more readable with anonymous functions and closures.
-
node makes handling binary data in JavaScript fast and efficient with its Buffer class. Decoding packets involves a lot of binary slicing and dicing which can be awkward with JavaScript strings.
-
Writing servers that capture packets, process them somehow, and then serve the processed data up in some way is very straightforward in node.
-
Node has a very good HTTP parser that is used to progressively decode HTTP sessions.
You will need libpcap installed. Most OSX machines seem to have it. All major Linux distributions have it available
either by default or with a package like libpcap-dev.
The easiest way to get node_pcap and its tools is with npm:
npm install pcap
If you want to hack on the source code, you can get it from github. Clone the repo like this:
git clone git://github.com/mranney/node_pcap.git
To compile the native code bindings, do this:
cd node_pcap
node-waf configure build
Assuming it built without errors, you should be able to run the examples and then write your own packet capture programs.
There are several example programs that show how to use node_pcap. These examples are best documentation.
Try them out and see what they do.
To use this library in your own program, pcap.js and pcap_binding.node must be in NODE_PATH. npm
takes care of this automatically.
To start a capture session, call pcap.createSession with an interface name and a pcap filter string:
var pcap = require('pcap'),
pcap_session = pcap.createSession(interface, filter);
interface is the name of the interface on which to capture packets. If passed an empty string, libpcap
will try to pick a "default" interface, which is often just the first one in some list and not what you want.
filter is a pcap filter expression, see pcap-filter(7) for more information. An empty string will capture
all packets visible on the interface.
Note that node_pcap always opens the interface in promiscuous mode, which generally requires running as root.
Unless you are recklessly roaming about as root already, you'll probably want to start your node program like this:
sudo node test.js
pcap_session is an EventEmitter that emits a packet event. The only argument to the callback will be a
Buffer object with the raw bytes returned by libpcap.
Listening for packets:
pcap_session.on('packet', function (raw_packet) {
// do some stuff with a raw packet
});
To convert raw_packet into a JavaScript object that is easy to work with, decode it:
var packet = pcap.decode.packet(raw_packet);
The protocol stack is exposed as a nested set of objects. For example, the TCP destination port is part of TCP which is encapsulated within IP, which is encapsulated within a link layer. Access it like this:
packet.link.ip.tcp.dport
This structure is easy to explore with sys.inspect.
TCP can be analyzed by feeding the packets into a TCP_tracker and then listening for start and end events.
var pcap = require('pcap'),
tcp_tracker = new pcap.TCP_tracker(),
pcap_session = pcap.createSession(interface, "ip proto \\tcp");
tcp_tracker.on('start', function (session) {
console.log("Start of TCP session between " + session.src_name + " and " + session.dst_name);
});
tcp_tracker.on('end', function (session) {
console.log("End of TCP session between " + session.src_name + " and " + session.dst_name);
});
pcap_session.on('packet', function (raw_packet) {
var packet = pcap.decode.packet(raw_packet);
tcp_tracker.track_packet(packet);
});
You must only send IPv4 TCP packets to the TCP tracker. Explore the session object with sys.inspect to
see the wonderful things it can do for you. Hopefully the names of the properties are self-explanatory:
{ src: '10.51.2.130:55965'
, dst: '75.119.207.0:80'
, syn_time: 1280425738896.771
, state: 'ESTAB'
, key: '10.51.2.130:55965-75.119.207.0:80'
, send_isn: 2869922608
, send_window_scale: 8
, send_packets: { '2869922609': 1280425738896.771 }
, send_acks: { '1063203923': 1280425738911.618 }
, send_retrans: {}
, send_next_seq: 2869922609
, send_acked_seq: null
, send_bytes_ip: 60
, send_bytes_tcp: 108
, send_bytes_payload: 144
, recv_isn: 1063203922
, recv_window_scale: 128
, recv_packets: { '1063203923': 1280425738911.536 }
, recv_acks: { '2869922609': 1280425738911.536 }
, recv_retrans: {}
, recv_next_seq: null
, recv_acked_seq: null
, recv_bytes_ip: 20
, recv_bytes_tcp: 40
, recv_bytes_payload: 0
, src_name: '10.51.2.130:55965'
, dst_name: '75.119.207.0:80'
, current_cap_time: 1280425738911.65
The TCP_tracker also detects and decodes HTTP on all streams it receives. If HTTP is detected, several
new events will be emitted:
-
http request: function(session, http) -
http request body: function(session, http, data)Note that
datais a node Buffer object sliced from the original packet. If you want to use it past the current tick, you'll need to make a copy somehow. -
http request complete: function(session, http) -
http response: function(session, http) -
http response body: function(session, http, data)datais a Buffer slice. See above. -
http response complete: function(session, http)
See http_trace for an example of how to use these events to decode HTTP.
The TCP_tracker further detects and decodes WebSocket traffic on all streams it receives.
websocket upgrade: function(session, http)websocket message: function(session, dir, message)
See http_trace for an example of how to use these events to decode WebSocket.
TSO is a technique that modern operating systems use to offload the burden of IP/TCP header computation to the network hardware. It also reduces the number of times that data is moved data between the kernel and the network hardware. TSO saves CPU when sending data that is larger than a single IP packet.
This is amazing and wonderful, but it does make some kinds of packet sniffing more difficult. In many cases,
it is important to see the exact packets that are sent, but if the network hardware is sending the packets,
these are not available to libpcap. The solution is to disable TSO.
OSX:
sudo sysctl -w net.inet.tcp.tso=0
Linux (substitute correct interface name):
sudo ethtool -K eth0 tso off
The symptoms of needing to disable TSO are messages like, "Received ACK for packet we didn't see get sent".
Sadly, node_pcap does not know how to decode IPv6 packets yet. Often when capturing traffic to localhost, IPv6 traffic
will arrive surprisingly, even though you were expecting IPv4. A common case is the hostname localhost, which many client programs will
resolve to the IPv6 address ::1 and then will try 127.0.0.1. Until we get IPv6 decode support, a libpcap filter can be
set to only see IPv4 traffic:
sudo http_trace lo0 "ip proto \tcp"
The backslash is important. The pcap filter language has an ambiguity with the word "tcp", so by escaping it, you'll get the correct interpretation for this case.
There are several levels of buffering involved in capturing packets. Sometimes these buffers fill up, and you'll drop packets. If this happens, it becomes difficult to reconstruct higher level protocols. The best way to keep the buffers from filling up is to use pcap filters to only consider traffic that you need to decode. The pcap filters are very efficient and run close to the kernel where they can process high packet rates.
If the pcap filters are set correctly and libpcap still drops packets, it is possible to increase libpcap's
buffer size. At the moment, this requires changing pcap_binding.cc. Look for pcap_set_buffer_size() and
set to a larger value.
This program captures packets and prints them using the built in simple printer. Here's a sample of it's output.
In another window I ran curl nodejs.org.
mjr:~/work/node_pcap$ sudo node examples/simple_capture.js en1 ""
libpcap version 1.0.0
en0 no address
* en1 10.240.0.133/255.255.255.0
lo0 127.0.0.1/255.0.0.0
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 10.240.0.1 ARP request 10.240.0.133
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c 10.240.0.133 ARP reply 10.240.0.1 hwaddr 00:18:39:ff:f9:1c
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c 10.240.0.133:53808 -> 97.107.132.72:80 TCP len 64
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c 10.240.0.133:57052 -> 10.240.0.1:53 DNS question 133.0.240.10.in-addr.arpa PTR
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c 10.240.0.133:57052 -> 10.240.0.1:53 DNS question 72.132.107.97.in-addr.arpa PTR
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c 10.240.0.133:57052 -> 10.240.0.1:53 DNS question 1.0.240.10.in-addr.arpa PTR
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 10.240.0.1:53 -> 10.240.0.133:57052 DNS answer 133.0.240.10.in-addr.arpa PTR
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 10.240.0.1:53 -> rv-mjr2.ranney.com:57052 DNS answer 72.132.107.97.in-addr.arpa PTR
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 10.240.0.1:53 -> rv-mjr2.ranney.com:57052 DNS answer 1.0.240.10.in-addr.arpa PTR
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 60
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 196
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 1500
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 337
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
00:18:39:ff:f9:1c -> 00:1f:5b:ce:3e:29 tinyclouds.org:80 -> rv-mjr2.ranney.com:53808 TCP len 52
00:1f:5b:ce:3e:29 -> 00:18:39:ff:f9:1c rv-mjr2.ranney.com:53808 -> tinyclouds.org:80 TCP len 52
[ { name: 'en0'
, addresses:
[ { addr: '10.51.2.183'
, netmask: '255.255.255.0'
, broadaddr: '10.51.2.255'
}
]
}
, { name: 'fw0', addresses: [] }
, { name: 'en1', addresses: [] }
, { name: 'lo0'
, addresses: [ { addr: '127.0.0.1', netmask: '255.0.0.0' } ]
, flags: 'PCAP_IF_LOOPBACK'
}
]
Running sys.inspect on the first three decoded packets of this TCP session.
First packet, TCP SYN:
{ ethernet:
{ dhost: '00:18:39:ff:f9:1c'
, shost: '00:1f:5b:ce:3e:29'
, ethertype: 2048
, ip:
{ version: 4
, header_length: 5
, diffserv: 0
, total_length: 64
, identification: 49042
, flags: { reserved: 0, df: 1, mf: 0 }
, fragment_offset: 0
, ttl: 64
, protocol: 6
, header_checksum: 35325
, saddr: '10.240.0.133'
, daddr: '97.107.132.72'
, protocol_name: 'TCP'
, tcp:
{ sport: 57230
, dport: 80
, seqno: 4179361823
, ackno: 1540242985
, data_offset: 11
, reserved: 0
, flags:
{ cwr: 0
, ece: 0
, urg: 0
, ack: 0
, psh: 0
, rst: 0
, syn: 1
, fin: 0
}
, window_size: 65535
, checksum: 2601
, urgent_pointer: 0
, payload_offset: 78
, payload: { length: 0 }
}
}
}
, pcap_header:
{ time: Sat, 22 May 2010 07:48:40 GMT
, tv_sec: 1274514520
, tv_usec: 820479
, caplen: 78
, len: 78
, link_type: 'LINKTYPE_ETHERNET'
}
}
Second packet, TCP SYN+ACK:
{ ethernet:
{ dhost: '00:1f:5b:ce:3e:29'
, shost: '00:18:39:ff:f9:1c'
, ethertype: 2048
, ip:
{ version: 4
, header_length: 5
, diffserv: 32
, total_length: 60
, identification: 0
, flags: { reserved: 0, df: 1, mf: 0 }
, fragment_offset: 0
, ttl: 48
, protocol: 6
, header_checksum: 22900
, saddr: '97.107.132.72'
, daddr: '10.240.0.133'
, protocol_name: 'TCP'
, tcp:
{ sport: 80
, dport: 57230
, seqno: 1042874392
, ackno: 973076764
, data_offset: 10
, reserved: 0
, flags:
{ cwr: 0
, ece: 0
, urg: 0
, ack: 1
, psh: 0
, rst: 0
, syn: 1
, fin: 0
}
, window_size: 5792
, checksum: 35930
, urgent_pointer: 0
, payload_offset: 74
, payload: { length: 0 }
}
}
}
, pcap_header:
{ time: Sat, 22 May 2010 07:48:40 GMT
, tv_sec: 1274514520
, tv_usec: 915980
, caplen: 74
, len: 74
, link_type: 'LINKTYPE_ETHERNET'
}
}
Third packet, TCP ACK, 3-way handshake is now complete:
{ ethernet:
{ dhost: '00:18:39:ff:f9:1c'
, shost: '00:1f:5b:ce:3e:29'
, ethertype: 2048
, ip:
{ version: 4
, header_length: 5
, diffserv: 0
, total_length: 52
, identification: 39874
, flags: { reserved: 0, df: 1, mf: 0 }
, fragment_offset: 0
, ttl: 64
, protocol: 6
, header_checksum: 44505
, saddr: '10.240.0.133'
, daddr: '97.107.132.72'
, protocol_name: 'TCP'
, tcp:
{ sport: 57230
, dport: 80
, seqno: 4179361823
, ackno: 1540242985
, data_offset: 8
, reserved: 0
, flags:
{ cwr: 0
, ece: 0
, urg: 0
, ack: 1
, psh: 0
, rst: 0
, syn: 0
, fin: 0
}
, window_size: 65535
, checksum: 53698
, urgent_pointer: 0
, payload_offset: 66
, payload: { length: 0 }
}
}
}
, pcap_header:
{ time: Sat, 22 May 2010 07:48:40 GMT
, tv_sec: 1274514520
, tv_usec: 916054
, caplen: 66
, len: 66
, link_type: 'LINKTYPE_ETHERNET'
}
}
I want to build up decoders and printers for all popular protocols. Patches are welcome.
Copyright (c) 2010 Matthew Ranney, http://ranney.com/
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.