Hardware wiring of TX/RX with the TR on the dashboard
camp0s opened this issue · 2 comments
camp0s commented
Hi,
how did you interface the 2-wire UART of Arduino (Atmel) with the single wire bus of the device (going to TR on the dash)board?
Tnx.
ands commented
Hi camp0s,
The schematic pdf is in the repo :)
https://github.com/ands/EsaBusModule/blob/master/hardware/EsaBusModule1.0/EsaBusModule1.0_Schematic.pdf
Have fun!
ands
camp0s commented
You are right, sorry - somehow I just saw the .JPG listed..