arduino-libraries/ArduinoMotorCarrier

Issues

• Servo motor can only be moved in very coarse steps

  #26 opened 5 years ago by M-Reimer
  1

• `controller.getFWVersion()` fails when using Portenta H7

  #62 opened 2 years ago by Wilfried71390
  3

• Add GitHub Action based CI

  #28 opened 5 years ago by aentinger
  0

• How to build the Firmware for SAMD11 ?

  #8 opened 3 years ago by KjellMorgenstern
  2

• Add support for Portenta H7

  #40 opened 3 years ago by aliphys
  1

• RESET already declared for Portenta H7

  #29 opened 3 years ago by gbr1
  1

• Add support for Arduino Due

  #31 opened 3 years ago by gbr1
  1

• 4- or 6-wire stepper motor

  #43 opened 4 years ago by logotype
  1

• battery voltage strange behaviour when using battery.getConverted() on MKR Motor Carrier

  #54 opened 3 years ago by gbr1
  1

• PID Position Controller does not work

  #24 opened 3 years ago by Ravenspark
  5

• Add GitHub Actions workflow to synchronise with shared repository labels

  #45 opened 4 years ago by aentinger
  0

• Absence of README.md file

  #17 opened 5 years ago by Engineer1999
  0

• What is the velocity unit ?

  #11 opened 5 years ago by Bug38
  2

• Motors run full speed as soon as Arduino is powered up and not connected via USB

  #23 opened 6 years ago by circuitBurn
  1

• change the PWM frequency on a MKRMotorCarrier

  #16 opened 6 years ago by norberto-pires
  3

• Sequentially testing each Servo

  #14 opened 7 years ago by gilgamesh000
  1

• J1-J4 connector types?

  #13 opened 7 years ago by malk0lm
  3

• Digital Read from motor?

  #12 opened 7 years ago by malk0lm
  2

• M1.setDuty not sending voltage

  #10 opened 7 years ago by malk0lm
  7

• Please provide better instructions on how to flash the firmware

  #2 opened 7 years ago by phretor
  8

• Add servo attach and detach feature

  #5 opened 7 years ago by madhugovindarajan
  1