Missing basic features
mjunior-fitec opened this issue · 1 comments
@facchinm , I've been working with MKRWAN1300 for about 8 months and I miss some basic features.
Some was already told on other issues here or on the forum.
The most important, currently, to me is related to #5 by @sslupsky and to my earlier reported issue: #15 , which are all about to missing basic features on the modem.
The most basic is regarding the channel configuration. If you need to use it on a channel plan with many channels (like US915 or AU915, having 64 channels) it's necessary to save the channel configuration in order to be able to perform an ABP join later.
The other, very important, is regarding the multicast address.
Both features are implemented on Murata's modem firmware (I have the docs, if someone needs just ask me) using the commands: AT+CHMASK and AT+MCAST.
Is there any workaround to achieve this on the current version?
Is there a roadmap with expectation to have those features on Arduino's modem firmware?
Thanks.
Hello MJunior, were you able to resolve this issue? Have a way of setting channgels?
I would like the Murata AT command set, the ST docs don't seem to match the Murata chip very well. Please do p[ost what you have, thank you!