no mqtt connection my sonoff TH 16
kamilo558 opened this issue · 6 comments
Hello,
a few days before i received my first sonoff devices.
I installed MQtt server on my raspberry pi 3 using this wiki https://wiki.fhem.de/wiki/Sonoff#MQTT_Server_einrichten
# Repo install:
wget http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key
sudo apt-key add mosquitto-repo.gpg.key
cd /etc/apt/sources.list.d/
sudo wget http://repo.mosquitto.org/debian/mosquitto-wheezy.list
# or for jessie
sudo wget http://repo.mosquitto.org/debian/mosquitto-jessie.list
sudo apt-get update
# mosquitto install and client command mosquito_sub
sudo apt-get install mosquitto mosquitto-clients
# MQTT Server Test
sudo service mosquitto status
with the result:
pi@raspberry ~ $ sudo service mosquitto status
● mosquitto.service - LSB: mosquitto MQTT v3.1 message broker
Loaded: loaded (/etc/init.d/mosquitto)
Active: active (running) since Sa 2017-01-28 18:22:32 CET; 1 weeks 1 days ago
Process: 629 ExecStart=/etc/init.d/mosquitto start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/mosquitto.service
└─657 /usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf
Feb 02 23:55:12 raspberrypi systemd[1]: Started LSB: mosquitto MQTT v3.1 mes....
Feb 03 18:39:37 raspberrypi systemd[1]: Started LSB: mosquitto MQTT v3.1 mes....
Feb 03 18:49:19 raspberrypi systemd[1]: Started LSB: mosquitto MQTT v3.1 mes....
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
Hint: Some lines were ellipsized, use -l to show in full.
Mqtt test on raspberry with ssh has worked fine with 2 ssh windows:
- one:
mosquitto_sub -h localhost -v -t test - one:
mosquitto_pub -h localhost -t test -m "Test Mosquitto"
Result in 1. window:
pi@raspberry ~ $ mosquitto_sub -h localhost -v -t test
test Test Mosquitto
In the webinterface of the sonoff console i get the following result:
00:00:00 APP: Project sonoff (Topic sonoff, Fallback DVES_1697CD, GroupTopic sonoffs) Version 3.1.2
00:00:00 Wifi: Connecting to AP1 HSHKH (XXXXXXXXXXXXXX) in mode 11N as sonoff-6093...
00:00:07 Wifi: Connected
00:00:07 HTTP: Webserver active on sonoff-6093 with IP address 192.168.178.29
19:00:36 MQTT: Attempting connection...
19:01:04 MQTT: Attempting connection...
19:01:21 MQTT: Attempting connection...
19:01:39 MQTT: Attempting connection...
19:01:56 MQTT: Attempting connection...
19:02:13 MQTT: Attempting connection...
19:02:30 RSLT: tele/sonoff/UPTIME = 1
19:02:30 MQTT: Attempting connection...
19:02:48 MQTT: Attempting connection...
19:03:05 MQTT: Attempting connection...
19:03:22 MQTT: Attempting connection...
19:03:39 MQTT: Attempting connection...
19:03:57 MQTT: Attempting connection...
19:04:14 MQTT: Attempting connection...
19:04:31 MQTT: Attempting connection...
19:04:41 RSLT: stat/sonoff/POWER = ON
19:04:48 MQTT: Attempting connection...
19:05:05 MQTT: Attempting connection...
19:05:23 MQTT: Attempting connection...
19:05:40 MQTT: Attempting connection...
In arendst software i have made the following changes:
#define STA_SSID "SSID" // Wifi SSID at home
#define STA_PASS "password" // Wifi password at home
#define WIFI_HOSTNAME "%s-%04d" // Expands to <MQTT_TOPIC>-<last 4 decimal chars of MAC address>
#define WIFI_CONFIG_TOOL WIFI_WPSCONFIG // Default tool if wifi fails to connect (WIFI_SMARTCONFIG, WIFI_MANAGER or WIFI_WPSCONFIG)
#define WIFI_CONFIG_TOOL WIFI_WPSCONFIG // Default tool if wifi fails to connect (WIFI_SMARTCONFIG, WIFI_MANAGER or WIFI_WPSCONFIG)
// Syslog
#define SYS_LOG_HOST "Ip-Adresse-Server"
// MQTT
#define MQTT_HOST "Ip-Adresse-Server"
#define MQTT_PORT 1883
"Ip-Adresse-Server" is the ip adress of my raspberry pi. This is the ip i use for ssh to communicate with my raspberry pi.
My sonoff still has no connection to mqtt on my raspberry.
Hope for your help.
Best regards,
Kamil
Try to install the latest version first as 3.1.2 is an old one. Download from https://github.com/arendst/Sonoff-Tasmota
Enable more logging with option 3 (weblog 3) and see what MQTT has to tell.
It might be one of the codes below:
#define MQTT_CONNECTION_TIMEOUT -4
-4: when connecting,
try setting the version in PubSubClient.h to the older version 3_1
// MQTT_VERSION : Pick the version
#define MQTT_VERSION MQTT_VERSION_3_1 <<- uncomment this line
Mosquitto 0.15-2 apparently does not support the newer version 3_1_1.
#define MQTT_CONNECTION_LOST -3
#define MQTT_CONNECT_FAILED -2
-2: means it's failing to create a network connection to the broker.
Have you checked one of the basic http examples to verify you have the network configuration and setup correct?
#define MQTT_DISCONNECTED -1
#define MQTT_CONNECTED 0
#define MQTT_CONNECT_BAD_PROTOCOL 1
#define MQTT_CONNECT_BAD_CLIENT_ID 2
#define MQTT_CONNECT_UNAVAILABLE 3
#define MQTT_CONNECT_BAD_CREDENTIALS 4
#define MQTT_CONNECT_UNAUTHORIZED 5
5: I found out that the error code 5 was from cloudmqtt " not authorised".
I had setup a new user "ESP8266Client" in cloudmqtt with a blank password, I'm guessing this isn't the way to do it.
Can you tell me which file i have to use for an update over wifi?
Ok. I installed the newest version.
now i receiver:
22:55:15 MQTT: Attempting connection...
22:55:16 mDNS: Query done with 0 mqtt services found
22:55:24 MQTT: CONNECT FAILED, rc -2. Retry in 10 seconds
22:55:35 MQTT: Attempting connection...
22:55:36 mDNS: Query done with 0 mqtt services found
22:55:45 MQTT: CONNECT FAILED, rc -2. Retry in 10 seconds
And see above what -2 means: network problems.
I am getting the same error message when connecting to MQTT, all was fine prior to the upgrade.
The connection to RPI mosquitto works fine for me using commit b88ec7f of june 19, 2017.