LaserGRBL ZERO POINT PROBLEM
TT2DENKER opened this issue · 1 comments
Hello,
I wrote before, but I may not have explained it correctly. Therefore, I did not receive a helpful answer. I have a TwoTrees TS2 10w laser machine. And I do my engraving-cutting work with LaserGRBL program on this machine. Recently, either I changed some settings without knowing it, or I started to experience a problem after the new update files. As I mentioned above, the working area of my TwoTrees TS2 10w machine is 450mm X 450mm. But as I stated, after the new update, I can no longer cut or engrave 450X450mm in the working area. I can't even work with 350X350mm dimensions. I immediately get $130 and $131 warnings. Because the point where any file I upload to the machine starts cutting/engraving is 10 cm to the right and above from the (zero) point. No matter what I did, I could not move the file to be processed on the LaserBRBL screen to the zero point. I am also sending you the images in the attachment. If the file/image can be placed at zero point on the program page, I will be able to cut or engrave in the appropriate working area of the machine. My request from you is to help me on how to correct the error in the images. Thank you in advance.
