Only one device active
Opened this issue · 1 comments
Hello. I have made several of these devices. All of them have been initialized and connected to the HomeKit, but only the first device that has registered with the Homekit is working and responding. The rest (if there are 2 or more) are not available (This accessory is not responding). The console log shows that all Blinds get different accessory IDs. What could be the problem?
ESP8266 log:
WiFi connecting...
WiFi connected, IP: 192.168.8.31
[5585] HomeKit: Update the CPU to run at 160MHz>>> [5598] HomeKit: Starting server
[ 5602] HomeKit: Using existing accessory ID: 0A:F0:BA:90:6F:22 >>> [5608] HomeKit: Found admin pairing with 8C84E689-665E-4CF7-B9D3-6206948D9B05, disabling pair setup
[5617] HomeKit: Configuring MDNS
[5622] HomeKit: MDNS begin: Blind, IP: 192.168.8.31
[5628] HomeKit: Init server over
Free heap: 39160, HomeKit clients: 0
Target position: 16 Free heap: 39744, HomeKit clients: 0
Target position: 16
Free heap: 39240, HomeKit clients: 0
........
factory reset it by depressing the middle button for at least 15 seconds.
there is still a pairing on the used esp8266 active.