Parametric 3d design for a modular drawer organizer. See https://www.thingiverse.com/thing:3827538 for examples.
It is intended to be used with FDM 3D printers.
I used the following settings:
- 0.4mm nozzle
- two perimeters
- two bottom layers
- zero infill for most parts, the long divider get 3% to avoid bulges
- remove elephant foot 0.15mm
I printed parts with PLA for the first tests and PETG for the final thing. Both worked fine.
Other people successfully used:
- 0.8mm extrusion width
- 1 perimeter
to speed up printing.