wireguard_game_ubuntu.sh两处报错

vps 1 buyvm 双网卡，eth0 和eth1，eth1默认未启用。
输入你客户端电脑的默认网关，打开cmd，使用ipconfig命令查看
比如192.168.1.1 ：10.98.22.254
Warning: /etc/wireguard/wg0.conf' is world accessible [#] ip link add wg0 type wireguard [#] wg setconf wg0 /dev/fd/63 Line unrecognized: eth1-jMASQUERADE'
Configuration parsing error
[#] ip link delete dev wg0

vps 2 cloudcone

输入你客户端电脑的默认网关，打开cmd，使用ipconfig命令查看
比如192.168.1.1 ：10.98.22.254
Warning: `/etc/wireguard/wg0.conf' is world accessible
[#] ip link add wg0 type wireguard
[#] wg setconf wg0 /dev/fd/63
[#] ip address add 10.0.0.1/24 dev wg0
[#] ip link set mtu 1420 up dev wg0
[#] resolvconf -a tun.wg0 -m 0 -x
Too few arguments.
Too few arguments.
[#] iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

同遇到双网卡问题，修复方法是把脚本中的 $eth 变量直接替换成 eth0

两行都要改

wireguard/wireguard_install_ubuntu.sh

Lines 45 to 46 in f2892a1

    
           PostUp   = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o $eth -j MASQUERADE 
        
           PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -D FORWARD -o wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o $eth -j MASQUERADE

	PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o $eth -j MASQUERADE
	PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -D FORWARD -o wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o $eth -j MASQUERADE