Adding two libraries

[LedArts]

Please tell me.
Can we merge a program of fast led and adafruit neo pixal in one single program. I try but lost of errors occur. sir can u give me any example.

[LedArts]

i am trying this examples but only one effect is running.

#include <Adafruit_NeoPixel.h>
#include "FastLED.h"
#define PIN 6
#define NUM_LEDS 50
// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB Pixels are wired for GRB bitstream (most NeoPixel products)
// NEO_RGB Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_LEDS, PIN, NEO_GRB + NEO_KHZ400);

// Define the array of leds
CRGB leds[NUM_LEDS];

void setup() {
FastLED.addLeds<WS2811, PIN, GRB>(leds, NUM_LEDS).setCorrection( TypicalLEDStrip );
strip.begin();
strip.show(); // Initialize all pixels to 'off'

}

// *** REPLACE FROM HERE ***
void loop() {

colorWipe(0x00,0xff,0x00, 50);
colorWipe(0x00,0x00,0x00, 50);
delay(50);
Sparkle(0xff, 0xff, 0xff, 0);
Sparkle(0xff, 0, 0xff, 0);
delay(50);
}

void colorWipe(byte red, byte green, byte blue, int SpeedDelay) {
for(uint16_t i=0; i<NUM_LEDS; i++) {
setPixel(i, red, green, blue);
showStrip();
delay(SpeedDelay);
}
}
// *** REPLACE TO HERE ***

void Sparkle(byte red, byte green, byte blue, int SpeedDelay) {
int Pixel = random(NUM_LEDS);
setPixel(Pixel,red,green,blue);
showStrip();
delay(SpeedDelay);
setPixel(Pixel,0,0,0);
}

void showStrip() {
#ifdef ADAFRUIT_NEOPIXEL_H
// NeoPixel
strip.show();
#endif
#ifndef ADAFRUIT_NEOPIXEL_H
// FastLED
FastLED.show();
#endif
}

void setPixel(int Pixel, byte red, byte green, byte blue) {
#ifdef ADAFRUIT_NEOPIXEL_H
// NeoPixel
strip.setPixelColor(Pixel, strip.Color(red, green, blue));
#endif
#ifndef ADAFRUIT_NEOPIXEL_H
// FastLED
leds[Pixel].r = red;
leds[Pixel].g = green;
leds[Pixel].b = blue;
#endif
}

void setAll(byte red, byte green, byte blue) {
for(int i = 0; i < NUM_LEDS; i++ ) {
setPixel(i, red, green, blue);
}
showStrip();
}

[atuline]

I would not recommend attempting to combine Adafruit and FastLED in a single program. They will probably conflict. My recommendation is for you to learn the code and to convert the routines you like to the library of your choice.

[LedArts]

ok thank you sir
actually i start my program from adafruit but due to less effects i want to add fast led also now i have to restart from fast led program.