No connection to kiss fc

Question

No connection to kiss fc

Jeff37382 opened this issue 6 years ago · 5 comments

Fresh build only hovered. At first I had reading in my osd when I was finishing. I go to actually fly and now at the bottom of my osd it reads "no connection to kiss fc" I've tried Reflashing, I've checkes the pins in the connector for damage. What's next?

Answer 1 · 2019-02-23T12:33:30.000Z

Selected OSD in KISS GUI (not logger!)?
Connected RX to TX and vice versa (FC to OSD)?

Answer 2 · 2019-02-23T12:55:53.000Z

Totally stumped sir, it previously worked a few Xs before. So I have the fame exact build already - works fine - just trying to iliminate the suspect I took and plugged in the new build pdb into my prior setups fc and it still not connected to kiss fc - I then took the existing build pdb and plugged it into the new fc and still not connected to fc - I'm pretty lost on this one......as far as your previous response where do I select kiss osd in the gui (under serial port config) everything looks norm in the config when comparing to my working build

…

On Sat, Feb 23, 2019, 7:33 AM awolf78 ***@***.*** wrote: Selected OSD in KISS GUI (not logger!)? Connected RX to TX and vice versa (FC to OSD)? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#61 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtsSdEauhePOKgr2KRcorLjJYclt0mqdks5vQTUbgaJpZM4bNxl4> .

Answer 3 · 2019-02-23T14:05:32.000Z

KISS GUI: Advanced tab, Logger config set to Logger disabled/OSD

Answer 4 · 2019-02-23T14:39:11.000Z

Thanks for your help - found the issue - for whatever reason I'm not getting power for the xtx on the steel pdb so I used the 7v common and the 5v pad just behind the vtx pad and had it bridges slightly. Fixed the joint and no issues....... For now. Thanks again.

…

On Sat, Feb 23, 2019, 9:05 AM awolf78 ***@***.*** wrote: KISS GUI: Advanced tab, Logger config set to Logger disabled/OSD — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#61 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtsSdJbRWBdkIqndU_nL8SzOMlO3BpTiks5vQUqsgaJpZM4bNxl4> .

Answer 5 · 2019-09-09T02:50:15.000Z

I’m having a similar issue. Everything looks normal and the issue just came about. The quad still flies completely smooth as hell and if there wasn’t a notification on my osd saying “Fc connection Lost” or “No connection to fc” I wouldn’t think anything was wrong. I changed the cables plugs and resoldered my rx.