More than one model's code gets run

Question

More than one model's code gets run

samholst opened this issue 5 years ago · 0 comments

What went wrong?

Any custom code in each of the models is run even when only one backup file is specified to be executed.

For example, in my_backup.rb I have a puts statement that says "Hi Ya'll". When I run the backup command for that, the puts statement in test_gzip_back.rb "wazzzzzup" is also displayed.

These puts statements are not the commands that are run on the actual server, but simulate that the custom code used on the actual backups are being run more than once even when that backup is not being executed.

What steps did you follow?

gem install backup --v 5.0.0.beta.2
gem install backup --v '4.4.0'
backup check
backup perform test_gzip_backup
backup perform my_backup
Check the file that is produced by backup

How is your copy of backup configured?

# encoding: utf-8
# my_backup.rb

Model.new(:my_backup, 'Description for my_backup') do

  puts "Hi ya'll"

  archive :my_archive do |archive|
    archive.add "~/code.rb"
  end

  ##
  # Local (Copy) [Storage]
  #
  store_with Local do |local|
    local.path       = "~/Backup/archives"
    local.keep       = 5
    # local.keep       = Time.now - 2592000 # Remove all backups older than 1 month.
  end

  ##
  # Gzip [Compressor]
  #
  compress_with Gzip
end

# encoding: utf-8
# test_gzip_backup.rb

Model.new(:test_gzip_backup, 'Description for my_backup') do
 puts "wazzzzzup"
 
 archive :my_archive do |archive|
    archive.add "~/code.rb"
  end

  ##
  # Local (Copy) [Storage]
  #
  store_with Local do |local|
    local.path       = "~/Backup/archives"
    local.keep       = 5
    # local.keep       = Time.now - 2592000 # Remove all backups older than 1 month.
  end

  ##
  # Gzip [Compressor]
  #
  compress_with Gzip
end

# encoding: utf-8

##
# Backup v5.x Configuration
#
# Documentation: http://backup.github.io/backup
# Issue Tracker: https://github.com/backup/backup/issues

##
# Config Options
#
# The options here may be overridden on the command line, but the result
# will depend on the use of --root-path on the command line.
#
# If --root-path is used on the command line, then all paths set here
# will be overridden. If a path (like --tmp-path) is not given along with
# --root-path, that path will use it's default location _relative to --root-path_.
#
# If --root-path is not used on the command line, a path option (like --tmp-path)
# given on the command line will override the tmp_path set here, but all other
# paths set here will be used.
#
# Note that relative paths given on the command line without --root-path
# are relative to the current directory. The root_path set here only applies
# to relative paths set here.
#
# ---
#
# Sets the root path for all relative paths, including default paths.
# May be an absolute path, or relative to the current working directory.
#
# root_path 'my/root'
#
# Sets the path where backups are processed until they're stored.
# This must have enough free space to hold apx. 2 backups.
# May be an absolute path, or relative to the current directory or +root_path+.
#
# tmp_path  'my/tmp'
#
# Sets the path where backup stores persistent information.
# When Backup's Cycler is used, small YAML files are stored here.
# May be an absolute path, or relative to the current directory or +root_path+.
#
# data_path 'my/data'

##
# Utilities
#
# If you need to use a utility other than the one Backup detects,
# or a utility can not be found in your $PATH.
#
#   Utilities.configure do
#     tar       '/usr/bin/gnutar'
#     redis_cli '/opt/redis/redis-cli'
#   end

##
# Logging
#
# Logging options may be set on the command line, but certain settings
# may only be configured here.
#
#   Logger.configure do
#     console.quiet     = true            # Same as command line: --quiet
#     logfile.max_bytes = 2_000_000       # Default: 500_000
#     syslog.enabled    = true            # Same as command line: --syslog
#     syslog.ident      = 'my_app_backup' # Default: 'backup'
#   end
#
# Command line options will override those set here.
# For example, the following would override the example settings above
# to disable syslog and enable console output.
#   backup perform --trigger my_backup --no-syslog --no-quiet

##
# Component Defaults
#
# Set default options to be applied to components in all models.
# Options set within a model will override those set here.
#
#   Storage::S3.defaults do |s3|
#     s3.access_key_id     = "my_access_key_id"
#     s3.secret_access_key = "my_secret_access_key"
#   end
#
#   Notifier::Mail.defaults do |mail|
#     mail.from                 = 'sender@email.com'
#     mail.to                   = 'receiver@email.com'
#     mail.address              = 'smtp.gmail.com'
#     mail.port                 = 587
#     mail.domain               = 'your.host.name'
#     mail.user_name            = 'sender@email.com'
#     mail.password             = 'my_password'
#     mail.authentication       = 'plain'
#     mail.encryption           = :starttls
#   end

##
# Preconfigured Models
#
# Create custom models with preconfigured components.
# Components added within the model definition will
# +add to+ the preconfigured components.
#
#   preconfigure 'MyModel' do
#     archive :user_pictures do |archive|
#       archive.add '~/pictures'
#     end
#
#     notify_by Mail do |mail|
#       mail.to = 'admin@email.com'
#     end
#   end
#
#   MyModel.new(:john_smith, 'John Smith Backup') do
#     archive :user_music do |archive|
#       archive.add '~/music'
#     end
#
#     notify_by Mail do |mail|
#       mail.to = 'john.smith@email.com'
#     end
#   end

Tell us about the computer that runs the backup gem

Operating system: Mac OS X Mojave and Ubuntu 16.04.5 LTS
Ruby version: 2.5.1 and 2.2.4