Problem with BCM94360NG
dbwjdrms9742 opened this issue · 1 comments
Recently, I bought BCM94360NG and installed it because it was said working native on macOS.
BUT i writing this inquiry because i have a serious problem with this LAN card.
The symptoms of the problem are as follows:
If you boot into macOS after installing the corresponding LAN card, it will work well, but if you boot into Windows after installing the same LAN card, Windows will stop working 20 seconds later and it will not work properly.
If you're not connected to Wi-Fi, or if the driver on that device is disabled, the symptoms disappear immediately, and it seems like Windows and the driver are in conflict, but I don't know what the problem is.
If you are using the BCM94360NG model and you are experiencing this symptom or have solved it, please leave a comment.
I have same laptop and same wifi card. i also had same issue earlier. only solution is to shield the four pins marked on the picture. See attached.
