Pinned Repositories
a-tale-of-event-loops
Notes describing my understanding of how modern Python event loops work
Adafruit_nRF52_Bootloader
USB-enabled bootloaders for the nRF52 BLE SoC chips
esp32
ESP32 Setup instructions and libraries
eventio
coroutine scheduler with automatic powerdown
iot-plot
Remote plotting library for resource constrained devices. Uses MQTT for communication.
IoT49
MicroPython programming environment for ESP32 microcontroller
iotpython
IoT-Python, experimental fork of CircuitPython
MicroPython_ESP32_psRAM_LoBo
MicroPython for ESP32 with psRAM support
org.openhab.binding.nx584
shell49
Micropython shell, based on rshell
bboser's Repositories
bboser/IoT49
MicroPython programming environment for ESP32 microcontroller
bboser/eventio
coroutine scheduler with automatic powerdown
bboser/org.openhab.binding.nx584
bboser/MicroPython_ESP32_psRAM_LoBo
MicroPython for ESP32 with psRAM support
bboser/iotpython
IoT-Python, experimental fork of CircuitPython
bboser/shell49
Micropython shell, based on rshell
bboser/esp32
ESP32 Setup instructions and libraries
bboser/iot-plot
Remote plotting library for resource constrained devices. Uses MQTT for communication.
bboser/a-tale-of-event-loops
Notes describing my understanding of how modern Python event loops work
bboser/Adafruit_nRF52_Bootloader
USB-enabled bootloaders for the nRF52 BLE SoC chips
bboser/circuitpython_kernel
Jupyter kernel to interact with CircuitPython board over USB
bboser/esp32-at
AT application for ESP32 ESP-IDF
bboser/esp32-driver
bboser/ESP_AT_Lib
Communicate with ESP8266 from host MCU using AT parser library
bboser/esptool
ESP8266 and ESP32 serial bootloader utility
bboser/hello-world
git pull request tutorial
bboser/jupyter_micropython_kernel
Jupyter kernel to interact with a MicroPython/ESP8266 over the serial REPL
bboser/micropython-lib
The MicroPython standard library
bboser/nrf5-calendar-example
bboser/nrf51-powerdown-examples
Powerdown examples for the nRF51, showing wakeup from system on with RTC and GPIO and from system off from GPIO.
bboser/org.openhab.binding.isy
bboser/pull-request-test
Check how to do a PR from command line
bboser/Zumo-Shield
PCB layout for Zumo robot shield