bdurbrow/grbl-Mega

Issues

• Is the dev on this dead?

  #34 opened 4 years ago by d4mer
  4

• Jog line number in report_realtime_status

  #43 opened a year ago by LeeRossCritchlow
  0

• ENHANCEMENT, Add plasma THC compatibilty and functions

  #25 opened 5 years ago by sinfocomp
  15

• not able to read sd card while connected to external drivers

  #42 opened 3 years ago by Ams-Laser
  0

• Jog mode bug

  #31 opened 4 years ago by how-eee
  12

• mcodes to switch pins on and off

  #39 opened 3 years ago by Tonybeta01
  6

• Question, where can i find the key maping for the keypad ?

  #41 opened 3 years ago by Ams-Laser
  1

• CNC plasma cutter

  #40 opened 3 years ago by Tonybeta01
  3

• sorted

  #36 opened 3 years ago by Tonybeta01
  3

• sorted

  #37 opened 3 years ago by Tonybeta01
  0

• sorted

  #38 opened 3 years ago by Tonybeta01
  0

• deleted

  #35 opened 3 years ago by rikstablades
  0

• New Machine Setup Questions

  #20 opened 5 years ago by bdurbrow
  58

• Any reason to use Ramps without Pololu drivers?

  #6 opened 5 years ago by Saur0o0n
  25

• Feed rate faster then it should be

  #33 opened 4 years ago by how-eee
  1

• LCD12864

  #27 opened 5 years ago by agap19
  2

• Please help with cloned axis X, Y

  #30 opened 4 years ago by sinfocomp
  0

• Y axis clone

  #29 opened 4 years ago by lgojniczek
  0

• Enhancement: pwm on m7 and m8

  #16 opened 5 years ago by thawkins
  2

• Laser PWM

  #28 opened 4 years ago by Bazza1959
  0

• Homing sequence

  #13 opened 5 years ago by thawkins
  24

• Enhancement Request - Switch to use D8 for spindle pwm/laser pwm

  #10 opened 5 years ago by thawkins
  8

• Separating DRO from actual controller

  #5 opened 5 years ago by Saur0o0n
  10

• Documentation Discussion

  #3 opened 5 years ago by bdurbrow
  12

• Enhancement request - read spindle rpm via i2c for display

  #8 opened 5 years ago by thawkins
  19

• Enhancement: save/restore configuration to/from sdcard

  #21 opened 5 years ago by thawkins
  2

• Enhancement: add jog menu.

  #22 opened 5 years ago by thawkins
  3

• Enhancement: add overrides menu:

  #23 opened 5 years ago by thawkins
  2

• Enhancment: Given #23, have menu entry to reset overrides to 100%

  #24 opened 5 years ago by thawkins
  2

• Enhancement, show effective feedrate and spindle

  #17 opened 5 years ago by thawkins
  3

• Enhancement, Laser mode pin

  #14 opened 5 years ago by thawkins
  8

• Arduino ide 1.8.10 uploading the update from October 2019 does not work matrix keypad

  #19 opened 5 years ago by qulet
  2

• Enhancement: Multiline fragment buffer

  #18 opened 5 years ago by thawkins
  6

• Simple docs, howtos

  #9 opened 5 years ago by thawkins
  14

• Enhancement:Variable spindle speed

  #15 opened 5 years ago by thawkins
  4

• Information - SDCard initialization can correctly drive FlashAir Wifi SD Card

  #11 opened 5 years ago by thawkins
  8

• transfer Gcode via USB

  #7 opened 5 years ago by qulet
  3

• Connecting a Chinese spindle with an inverter.

  #4 opened 5 years ago by qulet
  22

• Safety Door Input misbehavior

  #2 opened 5 years ago by bdurbrow
  6

• Halting after 5 min of run time.

  #1 opened 5 years ago by bdurbrow
  22