Flashing fails if there are certain special characters in the path
Closed this issue · 2 comments
benlye commented
Certain non-ASCII characters (e.g. č) in the path to the firmware file will cause flashing to fail.
C:\Temp\Flash-Multi>.\tools\dfu-util-multi.exe -a 2 -d 1EAF:0003 -D "C:\Temp\MPM priča\multi-stm-serial-aetr-v1.3.1.77.bin" -v
dfu-util-multi 0.7
Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
Copyright 2020 Ben Lye
This program is Free Software and has ABSOLUTELY NO WARRANTY
This version of dfu-util has been modified for flashing an STM32 MULTI-Module. It is intended for use with Flash Multi.
Please report bugs to https://github.com/benlye/dfu-util-multi
Filter on vendor = 0x1eaf product = 0x0003
Opening DFU capable USB device... ID 1eaf:0003
Run-time device DFU version 0110
Found DFU: [1eaf:0003] devnum=0, cfg=1, intf=0, alt=2, name="STM32duino bootloader v1.0 Upload to Flash 0x8002000"
Claiming USB DFU Interface...
Setting Alternate Setting #2 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0110
Device returned transfer size 1024
C:\Temp\MPM prica\multi-stm-serial-aetr-v1.3.1.77.bin: No such file or directory
github-actions commented
This issue has been automatically marked as stale because it has not had any recent activity. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed in 5 days.
github-actions commented
This issue has been automatically locked because there was no further activity after it was closed. Please open a new issue for any related problems.