wpa_supplicant failed to set beacon parameters

[plenque]

Hi!

I'm having problems connecting to my TV. The program's log shows this:

DEBUG: 11:04:52.192: Got state change notification from streaming sink to state ND_SINK_STATE_WAIT_SOCKET
DEBUG: 11:05:37.143: WfdServer: Finalize
DEBUG: 11:05:37.143: Got state change notification from streaming sink to state ND_SINK_STATE_ERROR
DEBUG: 11:05:38.977: Got state change notification from streaming sink to state ND_SINK_STATE_DISCONNECTED

And then I find this in the system's log:

May 23 11:28:32 - NetworkManager[1007]: <info>  [1590244112.4753] device (p2p-dev-wlo1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
May 23 11:28:32 - NetworkManager[1007]: <info>  [1590244112.4769] device (p2p-dev-wlo1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
May 23 11:28:32 - systemd-udevd[9880]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
May 23 11:28:33 - wpa_supplicant[1019]: P2P-GO-NEG-SUCCESS role=GO freq=5745 ht40=0 peer_dev=86:c0:ef:7c:0f:32 peer_iface=86:c0:ef:7c:0f:32 wps_method=PBC
May 23 11:28:33 - wpa_supplicant[1019]: Using interface p2p-wlo1-7 with hwaddr dc:8b:28:7f:c2:56 and ssid "DIRECT-3Z"
May 23 11:28:33 - wpa_supplicant[1019]: Failed to set beacon parameters
May 23 11:28:35 - ModemManager[1016]: <info>  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:14.3': not supported by any plugin
May 23 11:28:36 - wpa_supplicant[1019]: Interface initialization failed

Is it a hardware compatibility problem?

Thanks in advance!

[benzea]

I have this feeling that there is a regression in wpa_supplicant … others are reporting it crashing