Waiting for Api
druckgott opened this issue · 13 comments
#System
Taranis X-Lite Pro
Expresslrs 3.2.1
Betaflight 4.4.1
Current Version of this Script
on FrSky it worked, but Today I switch to Expresslrs.
If you believe there is an issue with the firmware itself please follow these steps:
I have "Waiting for Api" if I go to the script
I have Expresslrs 3.2.1 with 400 baud rate
I have installed Smartport
Checkt all in this Topic: #470
Hopfully I did not lost anything
Make sure telemetry is still enabled in the receiver tab
Yes it's enabled I checkt it several times
Expresslrs does not provide smartport it uses the crsf protocol
Ok this I did I ly reinstall after I'd did not work with crsf Protokoll. But what could be case this issue? Can I see any log?
is rx and telemetry working? the issue is that the script isn't getting a response to the request.
Yes that's the Stange point telemetry is working an rx is also working
I have checked it several times, I get updates on telemetry and also the rx I can see the movement in the betaflight I also did a flight and all wolres fine on my Lua script for telemetry.
Just installed nightly build on MERCURYG4 with ELRS 3.2.1 and Betaflight setup script seems to be fine.
But using Betaflight CMS I get only the main screen and no movement.
I have no VTX installed.
@druckgott what VTX setup do you have?
Betaflight I have compiled it, but I have nothing inside:
Is there a way to deaktivate it temporary (comment out) to check if this is the problem
I have DJI VTX
I also checkt the nightly build, but its same situation. ( https://github.com/betaflight/betaflight-tx-lua-scripts-nightlies/releases/tag/v20230313.7 )
In the Setup of the modul it says for status 500Hz 1Err --> where can I find out what the error is. (Telemety Update is comming I have checkt this in the telemetry page)
My board is a Mamba F405 MK2 and I have connected the reciver on tx3/rx3 Pad.
For Betaflight CMS I only get a blank sceen with ony information on the top right [enter] or similiar like this.
Ko I sed Baudrate to 3.75M and now it works ;-)
lol that's strange. It has always worked for me at 400k. you have to use bf master if you want betaflight cms to work
Ah ok no it's not so Important, I only test it because you mentioned it
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs within a week.
Issue closed automatically as inactive.