Problems with the "pause" command BIQU BX
WFloripes opened this issue · 0 comments
WFloripes commented
Hello, I'm experiencing a problem with the "pause" command, both via the slicer and via the touchscreen.
The pause is made normally, but on the return, the nozzle is displaced by 0.9mm from the last point. The offset is only on the Y axis.
I tried to change the firmware (BIQU BX Master) but the problem remains.
I would like to change the firmware, but I can't do it in VS Code, for some reason.
Any thoughts on the pause issue? Thanks.