Shure QLX-D Frequency Change
Closed this issue · 3 comments
jwnremt commented
Shure QLX-D Frequency Change
jwnremt commented
Please add the ability to change frequencies on shure qlx-d receivers to the QLX-D Module.
And possibly a feedback instance for the current frequency of a device.
Set Frequency | Command String: | < SET 1 FREQUENCY yyyyyy > | Where yyyyyy is the Frequency represented as yyy.yyy MHz.
| QLX-D Response: | < REP 1 FREQUENCY yyyyyy > < REP 1 GROUP_CHAN gg,cc > | QLX-D responds with both strings. Where gg is Group Number and cc is Channel Number. Where yyyyyy is the Frequency represented as yyy.yyy MHz. If the receiver is on a frequency that does not line up with a group and channel, then gg and cc will report ‘--,--‘.
josephdadams commented
I moved this to the Shure wireless module.
krocheck commented
this is in the latest dev build