'J': is not a valid type for non-type template parameter 'J' error in boost\fusion\container\vector\vector.hpp
derdotte opened this issue · 7 comments
I am using Visual Studio 2022 and am currently trying to compile the following code:
#include <iostream>
#include <cmath>
#include <thrust/device_vector.h>
#include <thrust/iterator/permutation_iterator.h>
#include <thrust/iterator/counting_iterator.h>
#include <boost/numeric/odeint/stepper/runge_kutta4.hpp>
#include <boost/numeric/odeint/integrate/integrate_const.hpp>
#include <boost/numeric/odeint/external/thrust/thrust.hpp>
using namespace std;
using namespace boost::numeric::odeint;
//change this to float if your device does not support double computation
typedef double value_type;
//[ thrust_phase_chain_system
//change this to host_vector< ... > if you want to run on CPU
typedef thrust::device_vector< value_type > state_type;
typedef thrust::device_vector< size_t > index_vector_type;
//typedef thrust::host_vector< value_type > state_type;
//typedef thrust::host_vector< size_t > index_vector_type;
class phase_oscillators
{
public:
struct sys_functor
{
template< class Tuple >
__host__ __device__
void operator()(Tuple t) // this functor works on tuples of values
{
// first, unpack the tuple into value, neighbors and omega
const value_type phi = thrust::get<0>(t);
const value_type phi_left = thrust::get<1>(t); // left neighbor
const value_type phi_right = thrust::get<2>(t); // right neighbor
const value_type omega = thrust::get<3>(t);
// the dynamical equation
thrust::get<4>(t) = omega + sin(phi_right - phi) + sin(phi - phi_left);
}
};
phase_oscillators(const state_type& omega)
: m_omega(omega), m_N(omega.size()), m_prev(omega.size()), m_next(omega.size())
{
// build indices pointing to left and right neighbours
thrust::counting_iterator<size_t> c(0);
thrust::copy(c, c + m_N - 1, m_prev.begin() + 1);
m_prev[0] = 0; // m_prev = { 0 , 0 , 1 , 2 , 3 , ... , N-1 }
thrust::copy(c + 1, c + m_N, m_next.begin());
m_next[m_N - 1] = m_N - 1; // m_next = { 1 , 2 , 3 , ... , N-1 , N-1 }
}
void operator() (const state_type& x, state_type& dxdt, const value_type dt)
{
thrust::for_each(
thrust::make_zip_iterator(
thrust::make_tuple(
x.begin(),
thrust::make_permutation_iterator(x.begin(), m_prev.begin()),
thrust::make_permutation_iterator(x.begin(), m_next.begin()),
m_omega.begin(),
dxdt.begin()
)),
thrust::make_zip_iterator(
thrust::make_tuple(
x.end(),
thrust::make_permutation_iterator(x.begin(), m_prev.end()),
thrust::make_permutation_iterator(x.begin(), m_next.end()),
m_omega.end(),
dxdt.end())),
sys_functor()
);
}
private:
const state_type& m_omega;
const size_t m_N;
index_vector_type m_prev;
index_vector_type m_next;
};
//]
const size_t N = 32768;
const value_type pi = 3.1415926535897932384626433832795029;
const value_type epsilon = 6.0 / (N * N); // should be < 8/N^2 to see phase locking
const value_type dt = 0.1;
int main(int arc, char* argv[])
{
//[ thrust_phase_chain_integration
// create initial conditions and omegas on host:
vector< value_type > x_host(N);
vector< value_type > omega_host(N);
for (size_t i = 0; i < N; ++i)
{
x_host[i] = 2.0 * pi * rand();
omega_host[i] = (N - i) * epsilon; // decreasing frequencies
}
// copy to device
state_type x = x_host;
state_type omega = omega_host;
// create stepper
runge_kutta4< state_type, value_type, state_type, value_type > stepper;
// create phase oscillator system function
phase_oscillators sys(omega);
// integrate
integrate_const(stepper, sys, x, 0.0, 10.0, dt);
thrust::copy(x.begin(), x.end(), std::ostream_iterator< value_type >(std::cout, "\n"));
std::cout << std::endl;
//]
}An error occurs upon compilation using VS22 community edition in vector.hpp.
Boost Version: 1.81
Platform: Windows 10 64x
This uses Thrust functionality to calculate a large amount of ODEs.
The error is:
Severity Code Description Project File Line Suppression State
Error C2993 'J': is not a valid type for non-type template parameter 'J' Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 236
Error C2062 type 'unknown-type' unexpected Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 236
Error C2334 unexpected token(s) preceding '{'; skipping apparent function body Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 239
Error C2993 'J': is not a valid type for non-type template parameter 'J' Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 243
Error C4430 missing type specifier - int assumed. Note: C++ does not support default-int Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 243
Error C2062 type 'unknown-type' unexpected Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 243
Error C2334 unexpected token(s) preceding '{'; skipping apparent function body Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 246
Error C2504 'boost::fusion::vector_detail::vector_data<std::integer_sequence<unsigned __int64,0,1,2,3>,boost::numeric::odeint::detail::stage<T,1>,boost::numeric::odeint::detail::stage<T,2>,boost::numeric::odeint::detail::stage<T,3>,boost::numeric::odeint::detail::stage<T,4>>': base class undefined Pairproduction C:\Program Files\Boost\boost_1_81_0\boost\fusion\container\vector\vector.hpp 253
Error MSB3721 The command ""C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v12.0\bin\nvcc.exe" -gencode=arch=compute_52,code=\"sm_52,compute_52\" --use-local-env -ccbin "G:\Visual Studio\VC\Tools\MSVC\14.34.31933\bin\HostX64\x64" -x cu -I"C:\Program Files\Boost\boost_1_81_0" -I"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v12.0\include" -I"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v12.0\include" -G --keep-dir x64\Debug -maxrregcount=0 --machine 64 --compile -cudart static -g -DWIN32 -DWIN64 -D_DEBUG -D_CONSOLE -D_MBCS -Xcompiler "/EHsc /W3 /nologo /Od /Fdx64\Debug\vc143.pdb /FS /Zi /RTC1 /MDd " -o "C:\Users\danie\OneDrive\Dokumente\schule\studium\7. Semester\Spezialisierung\Spezialisierung_code\Pairproduction\x64\Debug\kernel.cu.obj" "C:\Users\danie\OneDrive\Dokumente\schule\studium\7. Semester\Spezialisierung\Spezialisierung_code\Pairproduction\kernel.cu"" exited with code 2. Pairproduction G:\Visual Studio\MSBuild\Microsoft\VC\v170\BuildCustomizations\CUDA 12.0.targets 794
What is wrong and can i fix it on my end?
I've tried such a method:
correct the code in "boost\fusion\container\vector\vector.hpp"
private:
template <std::size_t J>
using store_at = decltype(store_at_impl(static_cast<vector_data*>(nullptr)));
public:
template <std::size_t J>
BOOST_CXX14_CONSTEXPR BOOST_FUSION_GPU_ENABLED
typename store_at::elem_type& at_impl(std::integral_constant<std::size_t, J>)
{
return store_at::elem;
}
template <std::size_t J>
BOOST_CONSTEXPR BOOST_FUSION_GPU_ENABLED
typename store_at<J>::elem_type const& at_impl(std::integral_constant<std::size_t, J>) const
{
return store_at<J>::elem;
}
};
NOTICE: I don't know whether such a method will have an influence on other libraries
If you think this is a fusion issue, please post an MVCE (without any dependencies). I have no expertise on the other dependent libraries.
Has this issue been solved？
Has this issue been solved？
Again, please post an MVCE https://stackoverflow.com/help/minimal-reproducible-example
Hello,
I have been facing the same issue then I am going to include a MVCE using a .cu file:
Configurations:
-Microsoft Visual Studio Community 2022 (64-bit) - Current
Version 17.11.0
-Nvidia Driver Version: 560.81
-CUDA Toolkit 12.6
-BOOST 1.86
-MVCE.cu
MVCE.cu:
#include <boost/numeric/odeint.hpp>
int main()
{
}
Output:
- Error C2334 unexpected token(s) preceding '{'; skipping apparent function body CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 246
2.Error C2993 'J': is not a valid type for non-type template parameter 'J' CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 236
-
Error C2062 type 'unknown-type' unexpected CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 236
-
Error C2334 unexpected token(s) preceding '{'; skipping apparent function body CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 239
5.Error C2993 'J': is not a valid type for non-type template parameter 'J' CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 243
6.Error C4430 missing type specifier - int assumed. Note: C++ does not support default-int CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 243
7.Error C2062 type 'unknown-type' unexpected CudaRuntime1 C:\Users\benny\Downloads\boost_1_86_0\boost\fusion\container\vector\vector.hpp 243
The first error refers to the use of a C++ version prior to C++ 20 but I have used C++ 20 and it is the same error.
On the other hand, if it is replaced odeint by interval then the code compiles properly.
#include <boost/numeric/odeint.hpp>
int main()
{
}
Output:
========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Build completed at 11:07 AM and took 01.917 seconds ==========
Finally, this code works properly in Ubuntu using CMake then it is not a general incompatibility between CUDA and BOOST. I hope you can help us with this issue. Thank you so much in advance! Let me know if there is something I can do to help you to fix this error.
#include <boost/numeric/odeint.hpp>
This is not directly a Boost.Fusion issue, and should probably be redirected to Boost.Numeric.Odeint instead.
Hello:
On Windows 11, I have found that if you comment out these lines from vector.hpp the code works properly. In my case, I am using the Boost library in the host then I do not need anything in the device. Definitely, there are some differences in how vector.hpp is treated on Windows and Ubuntu.
Code using C++ compiler:
#include <boost/numeric/odeint.hpp>
#include <iostream>
#include <vector>
using namespace boost::numeric::odeint;
std::vector<std::vector<double>> variable;
std::vector<double> times;
void system_of_equations(const std::vector<double>& variables,
std::vector<double>& derivative_rates, const double time)
{
derivative_rates[0] = variables[0] + variables[1];
derivative_rates[1] = variables[0] - variables[1];
}
void printVariables(const std::vector<double>& variables, const double time)
{
std::cout << "t=" << time << " "
<< "x=" << variables[0] << " "
<< "y=" << variables[1] << std::endl;
variable.push_back(variables);
times.push_back(time);
}
int main()
{
std::vector<double> initial_variables = { 1.0, 0.0 };
double start_time = 0.0, end_time = 5,
time_step = 1e-4;
integrate(system_of_equations, initial_variables, start_time, end_time, time_step, printVariables);
return 0;
}
Output:
t=0 x=1 y=0
t=0.0001 x=1.0001 y=0.0001
t=0.00055 x=1.00055 y=0.00055
t=0.002575 x=1.00258 y=0.00257501
t=0.0116875 x=1.01182 y=0.011688
t=0.0526938 x=1.05552 y=0.0527425
t=0.23332 x=1.29251 y=0.237577
t=0.413945 x=1.6143 y=0.437997
t=0.605022 x=2.07053 y=0.681595
t=0.796099 x=2.67888 y=0.975267
t=0.987176 x=3.48403 y=1.34059
t=1.17825 x=4.54515 y=1.8044
t=1.36933 x=5.94017 y=2.40077
t=1.56041 x=7.7716 y=3.17352
t=1.75148 x=10.174 y=4.17941
t=1.94256 x=13.3238 y=5.49234
t=2.13364 x=17.4525 y=7.20878
t=2.32471 x=22.8633 y=9.45482
t=2.51579 x=29.9538 y=12.3955
t=2.70687 x=39.2449 y=16.2468
t=2.89794 x=51.4192 y=21.2916
t=3.08902 x=67.371 y=27.9007
t=3.2801 x=88.2723 y=36.5596
t=3.47117 x=115.659 y=47.9043
t=3.66225 x=151.542 y=62.7684
t=3.85333 x=198.558 y=82.2438
t=4.0444 x=260.162 y=107.761
t=4.23548 x=340.879 y=141.196
t=4.42656 x=446.639 y=185.003
t=4.61763 x=585.212 y=242.402
t=4.80871 x=766.778 y=317.609
t=4.99979 x=1004.68 y=416.15
t=5 x=1004.98 y=416.276
Code using C++ and NVCC:
#include<cuda_runtime.h>
#include<stdio.h>
#include <boost/numeric/odeint.hpp>
#include <iostream>
#include <vector>
using namespace boost::numeric::odeint;
std::vector<std::vector<double>> variable;
std::vector<double> times;
void system_of_equations(const std::vector<double>& variables,
std::vector<double>& derivative_rates, const double time)
{
derivative_rates[0] = variables[0] + variables[1];
derivative_rates[1] = variables[0] - variables[1];
}
void printVariables(const std::vector<double>& variables, const double time)
{
std::cout << "t=" << time << " "
<< "x=" << variables[0] << " "
<< "y=" << variables[1] << std::endl;
variable.push_back(variables);
times.push_back(time);
}
__global__ void hello()
{
printf("Hello World!\n");
}
int main()
{
std::vector<double> initial_variables = { 1.0, 0.0 };
double start_time = 0.0, end_time = 5,
time_step = 1e-4;
integrate(system_of_equations, initial_variables, start_time, end_time, time_step, printVariables);
int* a;
cudaMalloc(&a, 10 * sizeof(int));
cudaFree(a);
hello << <1, 10 >> > ();
cudaDeviceReset();
return 0;
}
Output:
t=0 x=1 y=0
t=0.0001 x=1.0001 y=0.0001
t=0.00055 x=1.00055 y=0.00055
t=0.002575 x=1.00258 y=0.00257501
t=0.0116875 x=1.01182 y=0.011688
t=0.0526938 x=1.05552 y=0.0527425
t=0.23332 x=1.29251 y=0.237577
t=0.413945 x=1.6143 y=0.437997
t=0.605022 x=2.07053 y=0.681595
t=0.796099 x=2.67888 y=0.975267
t=0.987176 x=3.48403 y=1.34059
t=1.17825 x=4.54515 y=1.8044
t=1.36933 x=5.94017 y=2.40077
t=1.56041 x=7.7716 y=3.17352
t=1.75148 x=10.174 y=4.17941
t=1.94256 x=13.3238 y=5.49234
t=2.13364 x=17.4525 y=7.20878
t=2.32471 x=22.8633 y=9.45482
t=2.51579 x=29.9538 y=12.3955
t=2.70687 x=39.2449 y=16.2468
t=2.89794 x=51.4192 y=21.2916
t=3.08902 x=67.371 y=27.9007
t=3.2801 x=88.2723 y=36.5596
t=3.47117 x=115.659 y=47.9043
t=3.66225 x=151.542 y=62.7684
t=3.85333 x=198.558 y=82.2438
t=4.0444 x=260.162 y=107.761
t=4.23548 x=340.879 y=141.196
t=4.42656 x=446.639 y=185.003
t=4.61763 x=585.212 y=242.402
t=4.80871 x=766.778 y=317.609
t=4.99979 x=1004.68 y=416.15
t=5 x=1004.98 y=416.276
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!
Hello World!