Commodore server additional testing.

[kovu104]

Hey Bo,

Not really an issue per se more so doing some testing on your latest firmware.

I noticed on your firmware for C64 server.com for loading via Device ,2

I was testing the 2400 baud upload finally got the modem to connect. For the CSLOAD38.prg I noticed he was issuing the AT*D0 > that is given an error through ccgms. Just thought you would know that I tested your FW with AT&D0 and that set the bit I assume the D is a register and the binary value of 0 turns this off is this for Flow Control.

The other fellow that was testing this with you couldn't get the 38k driver going. What I notice is if you run a directory command on the server and then try to load any of your programs, you can see the data pull through the RS232 line and on screen but after awhile it stops. So I am wondering if the site has an issue perhaps on the HTTP end of things. I thought it would be fun to play around check out that command and let me know I maybe setting an incorrect value.

Anyways your Firmware is amazing thus far and re flashed my WiModem because you have more options.

Take Care :) Thank you for your contribution to C64 man your teaching me some stuff thank you thank you.