Issue with Pre configured image

Question

Issue with Pre configured image

Closed this issue 3 years ago · 10 comments

HI

Just flashed my SD card with the pre configured imaged.
Not sure it should have been there, but the /Volumes was not there, so I created it and added the SSID elements.
I Inserted the SD card inside the PI 0 W and booted it

So far nothing on the home kit, and on the PI screen it's kinda stuck at the boot Login/PWD, is that normal ?

thanks for your help

(Sorry if it's idiot i'm kind new to this world)

Answer 1 · 2021-01-24T04:39:18.000Z

No worries. I guess you need to login with the standard pi/raspberry account first. Then you need to setup wifi manuell too.

Answer 2 · 2021-01-24T08:28:41.000Z

Alright thanks Do you have the instructions to set up manullay the wifi ? Lucas

…

On 24 Jan 2021, at 05:39, MunichTester ***@***.***> wrote: No worries. I guess you need to login with the standard pi/raspberry account first. Then you need to setup wifi manuell too. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Answer 3 · 2021-01-24T09:05:10.000Z

Here you can find these infos https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

Answer 4 · 2021-01-25T08:27:56.000Z

hi ,

thanks a lot . I now have my pi on the Network , but the home app cannot detect anything ... :(

Answer 5 · 2021-01-25T09:03:58.000Z

If your pi is inside the 3D printed case? Watch out for the camera sensor ribbon getting displaced by the lid.

Either way, your next step is to remote into the pi with ssh and view the logs.

Answer 6 · 2021-01-25T10:10:54.000Z

Hi,

The board is still outside of the enclosure. I checked the camera connexion ,seems just fine. Any idea which file to look at in particular ?

Answer 7 · 2021-01-25T10:38:59.000Z

Give this a try, ssh into the pi.

Type out:
tail -f /var/log/hkcam/current

This should display the hkcam logs, as new logs are made, they will be displayed.

To exit this view hit:
ctrl + c

If you copy paste the output from the hkcam logs into here, someone more knowledgeable than me might be able to point you in the right direction.

Answer 8 · 2021-01-25T10:52:30.000Z

Hi, The log says Error : Failed to Open /dev/videoO : so such file or directory Thanks for the help

…

On Mon, 25 Jan 2021 at 11:39, Nick Turner ***@***.***> wrote: Give this a try, ssh into the pi. Type out: tail -f /var/log/hkcam/current This should display the hkcam logs, as new logs are made, they will be displayed. To exit this view hit: ctrl + c If you copy paste the output from the hkcam logs into here, someone more knowledgeable than me might be able to point you in the right direction. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#107 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASR5HGFBVVA5NB6L4GYPFT3S3VC5JANCNFSM4WOSWZKQ> .

Answer 9 · 2021-06-03T13:31:22.000Z

Yep same here with the latest image.
Edit:
After verification, turns out the ribbon was not working properly... Cheers!

Answer 10 · 2022-03-04T20:46:04.000Z

Please check your ribbon cables when connecting a standard camera module.

FYI: I've just released version 0.1.0 of hkcam.