Post Install sip
peekpt opened this issue · 16 comments
Installed Ventura, after installing EFi and reboot can't install post patch
Reset NVRAM opencore menue
then TAB Reboot
No infos about the laptop?
I did tried a few times.
Sorry it's a 650 g1 intel4600 core i7
Your certainely not booting from the post Install SSD
I have the same laptop
Look the config.plist
Yes I am , with the EFI generated from the .PKG file
Your not booting from this SSD because from this SSD SIP is fully disabled like your post in image
I am , I also disabled verbose --v just to be sure I'm booting the right EFI, no USB inserted.
try booting form HP USB create install media the SIP is the same
I will reinstall tomorrow then I give you feedback
Fresh install , same thing. I don't know what to do! Are you using OCLP 0.6.2?
Wait a moment... I am using 13.3 🤨 maybe that's why, I will install 13.2.1
Same thing happened, created a new USB boot disk with the 13.2.1.
What can I do?
Hi @chris1111 please don't be mad at me I want to help, I'm sorry if cause discomfort:
Anyway I finally manage to get it working.
this what I did to overcome my problems (no wifi, no battery, no post install patch):
-
updated to last OC 0.9.1 and OCConfigurator for 0.91
-
in ACPI one of them was disabled can't remember the one , but I enable all:
-
This missing line was causing the sip problem in OCLP post install
-
updated all drivers for OC 0.9.1
-
ECEnabler was missing in order to get battery working. My intel card is working with this driver. Both methods work, one uses Airportdriver the other creates a ethernet connection bridge and you need Heliport app to mimic the status icon.
I hope this helps!
I will add delete csr-active-config It won't change much but I don't have a problem with it.
@chris1111 Just to let you know that VoodoPs2Controller 2.3.5 it's working fine! I have full gestures now, don't need 1.9.2 anymore!
0.6.3 release intel fixed graphics on maps, imageviewer , etc...