Issues
- 0
HITL test harness functionality
#1268 opened - 3
- 0
add can message time in panda firmware
#1246 opened - 0
HITL safety tests
#1237 opened - 0
Refactor low level comms out of Panda class
#1214 opened - 0
- 0
Setup watchdog for heartbeat loop
#1205 opened - 2
- 1
receive nothing from can_recv()
#1184 opened - 0
SPI comms parity with USB
#1165 opened - 0
H7 tres: enable USB 3.3V LDO on init
#1146 opened - 0
H7: change RGB LED pins config to open drain
#1145 opened - 1
- 1
- 1
- 0
- 0
Safety cleanup
#1086 opened - 1
How to use "White Panda"
#1069 opened - 0
- 9
- 0
- 0
deepsleep improvements
#1005 opened - 0
- 2
- 5
pandacan library installation error
#982 opened - 3
can't transmit from USB if any queue is full
#968 opened - 1
Add Honda steering safety
#967 opened - 1
Rust implementation
#960 opened - 2
- 1
safety: add tests around driver torque
#945 opened - 0
Hyundai: check steer request bit
#941 opened - 1
pre-commit: add cppcheck + MISRA
#930 opened - 3
- 1
Where can I buy panda?
#922 opened - 0
- 1
add support for CAN-FD 1.0
#916 opened - 1
How to compile panda
#911 opened - 1
- 0
HITL tests improvement
#899 opened - 1
Enforce openpilot pre-enable behavior
#896 opened - 0
Honda Nidec: add safety to ACC_HUD message
#888 opened - 1
Panda SWD pins
#879 opened - 1
Sleep in _recv_dto
#867 opened - 2
- 1
- 1
- 2
- 3
Look into slow safety tests
#823 opened - 0
Don’t play siren if ignition goes low
#822 opened - 0