compulab-yokneam/meta-bsp-imx8mm

SDP support on IOT-GATE-iMX8 EVK

Closed this issue · 5 comments

danie007 commented

We're working on IOT-GATE-iMX8 EVK and building the Yocto Linux images based on this guide.

We want to enable SDP to work with UUU Tool but it seems like that the SDP support on SPL is scrapped out on the BSP.

We're getting the following error,

U-Boot SPL 2020.04-iot-gate-imx8-2.3-5.4.24-2.1.0+g4979a99482 (May 28 2021 - 06:32:44 +0000)
power_bd71837_init
DDRINFO(D): Nanya 2048G
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
DDRINFO(M): mr5-8 [ 0x5000010 ]
DDRINFO(E): mr5-8 [ 0x5000010 ]
Back to ROM, SDP

We've already raised this on UUU tool repo.

We would like to have a BSP with SDP support.

CC @tkmozhi

vraevsky commented

SDP port is J4.

  • 👍1
danie007 commented

@vraevsky appreciate your quick support. ✌🏾 We've verified it on the CompuLab IOT-GATE-IMX8 EVK and it's working as expected. 👍🏾

Thanks for this patch note as well. By any chance it'll result in a release?

CC @tkmozhi

vraevsky commented

Good luck, thanks for your reply.

  • 👍1