ipq6018: add support for yuncore ax840
legale opened this issue · 1 comments
Hello. I'm trying to add support for yuncore ax840
https://www.yuncorenet.com/item/ax840-p2-wi-fi6/11ax-1800mbps-wave2-0-high-power-industrial-ceiling-wireless-ap-wifi-6-ap
Based on this repo i'have made proper dts. Almost everything is good except wifi6 (only radio0 acn and radio1 bgn). I've found in my stock firmware that there is few packages for loading caldata.bin from spi flash. So i've added these packages to the sdk. Scripts for reading spi flash are working (caldata.bin appers in /lib/firmware/.../caldata.bin) but wifi6 is still not working. Maybe with your exp. you can say something.
This is stock fw bootlog:
https://paste.ec/paste/Q1AUMaYH#q4kdWmpTdTUJS7Gi1KLw3vcUnFyIPyHoDZnk8S2rCbe
This is fw maked with your sdk with some modifications (https://github.com/legale/openwrt-gl-ax1800):
https://zerobin.net/?557670cf61e29bc9#AqLzxEKGJWF+sPv2MHCde0Eh/Uqb0j/kMGnREnwciPg=
Thank you.
You forget to change the following code: target/linux/ipq60xx/base-files.