Pinned Repositories
Chorus32-ESP32LapTimer
This is my playground for new changes. Might be broken ;)
elrs_handset
Custom DIY dual band (900/2400MHz) transmitter (handset) based on ExpressLRS.
ExpressLRS
ESP32/ESP8285 based LoRa Radio Link
FENIX-rx5808-pro-diversity
ESP32 diversity video receiver - https://discord.gg/gG2sjjK
fmi-hass-custom
Home Assistant Custom Component Supporting FMI Based Weather and Sensor Platforms
fpv_findland_racer
klipper
!!!!EXPERIMENTAL!!!! No waranty, use at your own risk!
rc_receiver_to_pwm
Converts RC receiver serial output to PWM signals.
rc_receiver_to_usb_hid
STM32F1xx based USB HID for SBUS/CRSF/GHST/ELRS receivers.
saleae_logic_decoders
Decoders for Saleae Logic software
cruwaller's Repositories
cruwaller/1AUD-filter
cruwaller/libusb_stm32
Lightweight USB device Stack for STM32 microcontrollers
cruwaller/arduino-platform-sam
Temporary testing repository for https://github.com/arduino/Arduino/pull/1823
cruwaller/arduino_sketches
Publicly-released sketches for the Arduino microprocessor
cruwaller/DuetWebControl
A completely new web interface for the Duet electronics
cruwaller/esp-Update-over-RS485
Sending files and firmware updates over Serial/RS-485. Works with ESP8266/ESP32
cruwaller/ESPRINTER
Duet web panel for ESP8266
cruwaller/esptool-ftdi
esptool.py wrapper for FTDI devices to use RTS/CTS instead of RTS/DTR
cruwaller/libopencm3
Open Source ARM cortex m microcontroller library
cruwaller/lpc17xx.cmsis.driver.library
NXP LPC17XX Cortex-M3 library patched for crosstool-ng use
cruwaller/MKS-SBASE-FULL-DOCUMENTED
cruwaller/MKS-TFT
MKS TFT32/28 alternative firmware
cruwaller/ModdOSD
Open source hardware/firmware project to replace the MAX7456 OSD chip commonly used in flight controllers.
cruwaller/RepRapFirmware-RADDS
RepRapFirmware for RADDS; development by dcnewman terminated 21 April 2016
cruwaller/RF-Power-Meter
cruwaller/SBUS
Arduino library for the Futaba SBUS protocol
cruwaller/TFTLCD-Library
Arduino library for 8-bit TFT LCDs such as ILI9325, ILI9328, etc byMCUFRIEND
cruwaller/TRAMS
TRINAMIC ReRrap Arduino Mega Shield, Reference Design for 3D Printing with 4x TMC5130