Error when installing lhotse
Opened this issue · 1 comments
WangHelin1997 commented
Hi, I found errors when installing lhoste. Do you know anything about that?
Thanks.
(k2) hwang258@c07:~$ pip install lhotse
Collecting lhotse
Downloading lhotse-1.5.0-py3-none-any.whl (490 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 490.9/490.9 kB 5.8 MB/s eta 0:00:00
Collecting intervaltree>=3.1.0
Downloading intervaltree-3.1.0.tar.gz (32 kB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: numpy>=1.18.1 in ./anaconda3/envs/k2/lib/python3.8/site-packages (from lhotse) (1.23.1)
Collecting lilcom>=1.1.0
Downloading lilcom-1.2.1.tar.gz (44 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 44.5/44.5 kB 3.6 MB/s eta 0:00:00
Preparing metadata (setup.py) ... done
Collecting SoundFile>=0.10
Using cached SoundFile-0.10.3.post1-py2.py3-none-any.whl (21 kB)
Collecting dataclasses
Downloading dataclasses-0.6-py3-none-any.whl (14 kB)
Collecting packaging
Using cached packaging-21.3-py3-none-any.whl (40 kB)
Collecting audioread>=2.1.9
Downloading audioread-3.0.0.tar.gz (377 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 377.0/377.0 kB 7.1 MB/s eta 0:00:00
Preparing metadata (setup.py) ... done
Collecting click>=7.1.1
Downloading click-8.1.3-py3-none-any.whl (96 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 96.6/96.6 kB 5.5 MB/s eta 0:00:00
Collecting pyyaml>=5.3.1
Downloading PyYAML-6.0-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (701 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 701.2/701.2 kB 6.7 MB/s eta 0:00:00
Collecting cytoolz>=0.10.1
Downloading cytoolz-0.12.0-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (1.8 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 6.1 MB/s eta 0:00:00
Collecting tqdm
Using cached tqdm-4.64.0-py2.py3-none-any.whl (78 kB)
Collecting toolz>=0.8.0
Downloading toolz-0.12.0-py3-none-any.whl (55 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.8/55.8 kB 3.0 MB/s eta 0:00:00
Collecting sortedcontainers<3.0,>=2.0
Downloading sortedcontainers-2.4.0-py2.py3-none-any.whl (29 kB)
Collecting numpy>=1.18.1
Downloading numpy-1.22.4-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (16.9 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 16.9/16.9 MB 5.0 MB/s eta 0:00:00
Collecting cffi>=1.0
Downloading cffi-1.15.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (442 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 442.7/442.7 kB 7.1 MB/s eta 0:00:00
Collecting pyparsing!=3.0.5,>=2.0.2
Using cached pyparsing-3.0.9-py3-none-any.whl (98 kB)
Collecting pycparser
Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
Building wheels for collected packages: audioread, intervaltree, lilcom
Building wheel for audioread (setup.py) ... done
Created wheel for audioread: filename=audioread-3.0.0-py3-none-any.whl size=23703 sha256=f0c797d34b5ae92038b1b584ee2b8d0e23faa738fa4963f1a0b5dd0336c4ebe2
Stored in directory: /home/hwang258/.cache/pip/wheels/0a/ed/be/49df2538fca496690a024a4374455584d65c2afd6fc3d6e9c7
Building wheel for intervaltree (setup.py) ... done
Created wheel for intervaltree: filename=intervaltree-3.1.0-py2.py3-none-any.whl size=26100 sha256=3a236d5c8a30c6123e645d2f4067219a56c055175a9ec9b16c416ea34645bdf0
Stored in directory: /home/hwang258/.cache/pip/wheels/45/23/de/5789a92962483fd33cb06674792b9697c1b3766d7c7742830e
Building wheel for lilcom (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [79 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-38
creating build/lib.linux-x86_64-cpython-38/lilcom
copying lilcom/lilcom_interface.py -> build/lib.linux-x86_64-cpython-38/lilcom
copying lilcom/__init__.py -> build/lib.linux-x86_64-cpython-38/lilcom
running build_ext
Setting PYTHON_EXECUTABLE to /home/hwang258/anaconda3/envs/k2/bin/python
For fast compilation, run:
export LILCOM_MAKE_ARGS="-j"; python setup.py install
build command is:
cd build/temp.linux-x86_64-cpython-38
cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/home/hwang258/anaconda3/envs/k2/bin/python /tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02
make lilcom_extension
CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
CMake 3.8 or higher is required. You are running version 3.7.2
-- Configuring incomplete, errors occurred!
make: *** No rule to make target 'lilcom_extension'. Stop.
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02/setup.py", line 52, in <module>
setuptools.setup(
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/__init__.py", line 87, in setup
return distutils.core.setup(**attrs)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 973, in run_commands
self.run_command(cmd)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/wheel/bdist_wheel.py", line 299, in run
self.run_command('build')
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/cmd.py", line 319, in run_command
self.distribution.run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/build.py", line 24, in run
super().run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build.py", line 132, in run
self.run_command(cmd_name)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/cmd.py", line 319, in run_command
self.distribution.run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/build_ext.py", line 79, in run
_build_ext.run(self)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 346, in run
self.build_extensions()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 466, in build_extensions
self._build_extensions_serial()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 492, in _build_extensions_serial
self.build_extension(ext)
File "/tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02/cmake/cmake_extension.py", line 101, in build_extension
raise Exception(
Exception:
Build lilcom failed. Please check the error message.
You can ask for help by creating an issue on GitHub.
Click:
https://github.com/danpovey/lilcom/issues/new
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for lilcom
Running setup.py clean for lilcom
Successfully built audioread intervaltree
Failed to build lilcom
Installing collected packages: sortedcontainers, dataclasses, tqdm, toolz, pyyaml, pyparsing, pycparser, numpy, intervaltree, click, audioread, packaging, lilcom, cytoolz, cffi, SoundFile, lhotse
Attempting uninstall: numpy
Found existing installation: numpy 1.23.1
Uninstalling numpy-1.23.1:
Successfully uninstalled numpy-1.23.1
Running setup.py install for lilcom ... error
error: subprocess-exited-with-error
× Running setup.py install for lilcom did not run successfully.
│ exit code: 1
╰─> [83 lines of output]
running install
/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-38
creating build/lib.linux-x86_64-cpython-38/lilcom
copying lilcom/lilcom_interface.py -> build/lib.linux-x86_64-cpython-38/lilcom
copying lilcom/__init__.py -> build/lib.linux-x86_64-cpython-38/lilcom
running build_ext
Setting PYTHON_EXECUTABLE to /home/hwang258/anaconda3/envs/k2/bin/python
For fast compilation, run:
export LILCOM_MAKE_ARGS="-j"; python setup.py install
build command is:
cd build/temp.linux-x86_64-cpython-38
cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/home/hwang258/anaconda3/envs/k2/bin/python /tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02
make lilcom_extension
CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
CMake 3.8 or higher is required. You are running version 3.7.2
-- Configuring incomplete, errors occurred!
make: *** No rule to make target 'lilcom_extension'. Stop.
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02/setup.py", line 52, in <module>
setuptools.setup(
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/__init__.py", line 87, in setup
return distutils.core.setup(**attrs)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 973, in run_commands
self.run_command(cmd)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/install.py", line 68, in run
return orig.install.run(self)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/install.py", line 692, in run
self.run_command('build')
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/cmd.py", line 319, in run_command
self.distribution.run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/build.py", line 24, in run
super().run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build.py", line 132, in run
self.run_command(cmd_name)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/cmd.py", line 319, in run_command
self.distribution.run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/dist.py", line 1217, in run_command
super().run_command(command)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 992, in run_command
cmd_obj.run()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/command/build_ext.py", line 79, in run
_build_ext.run(self)
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 346, in run
self.build_extensions()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 466, in build_extensions
self._build_extensions_serial()
File "/home/hwang258/anaconda3/envs/k2/lib/python3.8/site-packages/setuptools/_distutils/command/build_ext.py", line 492, in _build_extensions_serial
self.build_extension(ext)
File "/tmp/pip-install-vi92662e/lilcom_11a4eed184dc472abb6a870ef0757b02/cmake/cmake_extension.py", line 101, in build_extension
raise Exception(
Exception:
Build lilcom failed. Please check the error message.
You can ask for help by creating an issue on GitHub.
Click:
https://github.com/danpovey/lilcom/issues/new
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> lilcom
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
csukuangfj commented
From the error log:
CMake Error at CMakeLists.txt:1 (cmake_minimum_required):
CMake 3.8 or higher is required. You are running version 3.7.2
Please update your CMake.