Full Arm issue from Home Assistant
Closed this issue · 3 comments
Describe the bug
I have 'full_arm' mapped to 'armed_away' in Home Assistant config (screenshot below).
It successfully detects as 'armed_away' in the alarm_control_panel entity, when I manually arm with the Texecom keypad.
However, when trying in Home Assistant, it arms it in to the part_arm_1 mode. This happens with both the 'alarm_control_panel.alarm_arm_away' service and a manual publish to the relevant MQTT topic (with 'full_arm' as payload).
Application version
1.1.15
config below
Texecom alarm type
Premier Elite 48
Home Assistant version
2021.12.8
Debug log
This is really odd. I use the exact same setup (full_arm = armed_away) which works as expected and I've never had a report of the app doing this before. The only thing I can assume is that your panel is configured differently?
I just went through and started messing with some settings and you were right, it was a panel setting..
This was the culprit:
Apologies for raising this as an issue and appreciate the response 🙂
No problem, glad you've got it sorted 🙂