deislabs/containerd-wasm-shims

No Spin logs in release

0xE282B0 opened this issue · 3 comments

0xE282B0 commented

Hi,
I noticed that with the release (at least 0.9.3 and 0.10.0) there are again no logs from within the module.
When I check out the 0.10.0 tag and do a make install the logs are working.

Expected output with the ghcr.io/deislabs/containerd-wasm-shims/example s/spin-rust-hello:latest image after calling localhost:80/hello:

Serving http://0.0.0.0:80
Available Routes:
  hello: http://0.0.0.0:80/hello
  go-hello: http://0.0.0.0:80/go-hello
Hello, world! You should see me in pod logs

Could it be something related to the binary stripping during release process?

Mossaka commented

When I check out the 0.10.0 tag and do a make install the logs are working.

That't super strange. Umm I am not sure the binary stripping would affect logging as it's set up with spin's hooks.

Mossaka commented

Hey @0xE282B0 , could you please veirfy that the binary you were using is indeed v0.10.0?

0xE282B0 commented

Hi,
There was indeed no problem with the release, only the log message was removed from the test image in this commit a week before. I guess I had an old version cached in my cluster where the log message was still there, and with the K3d quickstart cluster I didn't see it because it was removed from the code.

In short, the actual behavior of the test image is that the /hello endpoint does not log anything, but the /go-hello endpoint does. I'll close this issue.