Imagebuilder.sh public key error

[AdrianFajt]

Hi all,

I am facing the following issue with the imagebuilder.sh:

I get the error:

Public key doesn't exist or is not readable

Even though the keyfile is present in the firmware builder directory.

I am using the command:
./imagebuilder.sh -f v11_001886.fullos.pkg -s english.pkg -k id_rsa.pub -t Europe/Berlin --disable-firmware-updates --disable-logs

to execute it.

[LRO80]

Hi, have you got a solution.

I am getting the same fault using the same syntax like you. Instead of rsa I also tried a new created key with ed25519, nothing changed. Its quiet frustrating.

Cheers

Lars

[ksaadatg]

Hi, my problem was the following: Downloading/cloning dgiese/dustcloud will create several sub folders such as dustcloud/devices/xiaomi-vacuum...
There is another firmware builder which is in conflict with step no. 6 from dgiese/dustcloud wiki.
The command in step 6 must be shortend, so it refers to the correct firmware builder, the correct key etc.
In my case the command was --> "sudo ./dustcloud/imagebuilder.sh -f v11_003468.fullos.pkg -k id_ed25519.pub" ... depending which firmware and key you are using. Good luck!