yaesu output
iv3sde opened this issue · 5 comments
hallo,
fantastic job !!!
I think that to have more compatibility the output string should be only +0000 and not +0000+0000 if only azimuth
is correct ??
Hey @iv3sde,
good question. I´m honestly not sure and I don't have a Yaesu rotator here to verify the exact behaviour. From the specification I understand that the Yaesu rotators two commands (C
and C2
) to query the position. C
will return +0000
and C2
will return +0000+0000
.
Currently the application automatically broadcasts in a determined period (some 100s milliseconds) the updated string whenever the rotator is turning. I'm not sure if this is the default behaviour of the Yaesu rotators.
The reason why remoteRotator is broadcasting to the connected TCP sockets +0000+0000
is that EA4TX Arsvcom expects this string. However one posibility would be to completely disable the broadcasting and let the connected application poll remoteRotator for updates.
hw?
Thanks for the reply,
I think that C should return only +0000 (az pos.) And C2 + 0000 + 0000
I have a self-made rotor with home made software in arduino with usr tcp232 partly from k3ng.
I use it perfectly with N1MM, Logger32, rotorcraft etc. with no problem.
I think the difference is between A and B ...
I'm available for tests
Hi,
but the commando C
does already return just the azimuth part +0000
:
$ telnet localhost 7373
Trying ::1...
Connected to localhost.
Escape character is '^]'.
?>C
+0303
can you confirm this?
... is the pull ??
+0181+0000
+0184+0000
+0182+0000
+0183+0000
c
+0184
+0181+0000
c
+0181
+0183+0000
+0182+0000
+0183+0000
+0181+0000
thats correct. You get a +0000
response to your C
request. However as long as the antenna moves, the update is broadcasted in the +0000+0000
format. One way to would be to disable the broadcasts and let the connected application decide to poll the position. So in practical terms, you have to explicitly request every x (milli)seconds the position of the rotator either by a C
or C2
command.