DiamondLightSource/pmacFilterControl

Issues

• Label images 0 when filters stationary or 1 for when filters moving

  #52 opened 2 years ago
  0

• Reduce console logging

  #49 opened 2 years ago
  0

• Set positions automatically on startup

  #48 opened 2 years ago
  1

• Process period not working

  #39 opened 2 years ago
  4

• Add API to set shutter open and close positions

  #35 opened 2 years ago
  4

• IOC requires a scale factor to adjust the histogram thresholds by for singleshot mode

  #33 opened 2 years ago
  1

• IOC does not send down manual attenuation level because PV is unchanged

  #32 opened 2 years ago
  1

• Make default in and out positions different

  #31 opened 2 years ago
  2

• Add manual control of filter attenuation

  #27 opened 2 years ago
  0

• When run on ppmac `time_since_last_message` gets reset at 4

  #24 opened 2 years ago
  0

• Strange crash when terminal window changed

  #22 opened 2 years ago
  1

• Add more system tests

  #21 opened 2 years ago
  0

• Confirm event stream API

  #20 opened 2 years ago
  1

• Clear out old messages queued on sockets

  #19 opened 2 years ago
  0

• Reconsider running commands through PLC with a bit mask variable rather than with `CommandTS`

  #15 opened 2 years ago
  0

• Make python system test to send commands and check changes in status to verify correct behaviour

  #11 opened 2 years ago
  1

• Expose move duration in pmacFilterControl status

  #10 opened 2 years ago
  0

• Document singleshot mode API for higher level applications

  #9 opened 2 years ago
  0

• Re-implement ZMQ test tools in python

  #8 opened a month ago
  0

• Add ZMQ attenuation change event stream

  #7 opened 2 years ago
  0

• Add configuration of out_positions instead of assuming 0

  #6 opened 2 years ago
  0

• Add third high threshold which will close the fast shutter when exceeded

  #5 opened 2 years ago
  0

• Make timeout length a configurable option

  #4 opened 2 years ago
  1

• Implement ZMQ subscribe channel and file writer to record events from pmacFilterControl application

  #3 opened 2 years ago
  2

• Deploy pmacFilterControl application on PowerBrick under procServ

  #2 opened 2 years ago
  1

• Create pythonSoftIOC to control pmacFilterControl application

  #1 opened 2 years ago
  2