Lots of warnings in home assistant
Opened this issue · 2 comments
MichaelBitard commented
I have a lot of them.
29931 occurrences since july 11
These logs are grouped together:
- RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:e0f8, sequence:179, lqi:255
- Unknown response 0x8035
- RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:e0f8, sequence:191, lqi:255
*Device e0f8 doesn't receive last command to endpoint 1 cluster 6: 0xa7
*Device 0c33 doesn't receive last command to endpoint 1 cluster 6: 0xa7
I'm not sure what I can do to help investigate further. I have the latest version installed (9fa0101) with home assistant 0.112.4
bokub commented
The same problem started a few days ago on my home assistant.
My zigbee devices randomy stop working and I have no idea why...
2020-07-17 11:25:53 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:210, lqi:241
2020-07-17 11:27:54 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:190, lqi:125
2020-07-17 11:29:55 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:231, lqi:0
2020-07-17 11:31:56 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:204, lqi:0
2020-07-17 11:33:57 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:67, lqi:0
2020-07-17 11:35:58 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:228, lqi:0
2020-07-17 11:37:59 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:142, lqi:127
2020-07-17 11:40:00 WARNING (ZiGate-Decode data) [zigate] RESPONSE 0x8702 - APS Data Confirm Fail : status:212, source_endpoint:1, dst_endpoint:1, dst_address_mode:2, dst_address:7e8c, sequence:132, lqi:0
bokub commented
Problem fixed on my side
It seems the wiring of my Pizigate was bad. I unplugged everything and restarted from scratch and now everything works