Great funtionality!
Opened this issue · 2 comments
Dear all,
I tested the initial firmware as it was released but then the project I had in mind for this application did not start.
Now I'm testing the newest firmware again and I find it working really nicely!
I have an application now where I will use two modules talking to eachother and transferring 2 digital inputs over a distance of 1km through tough terrain (trees,...).
Initial tests show that the connection is possible.
I'll get back to You, with information or maybe also some wishes for additional functionality if needed. :)
I just wanted to reach back and say Thank You!
BR, Edvard
Dear all, I tested the initial firmware as it was released but then the project I had in mind for this application did not start. Now I'm testing the newest firmware again and I find it working really nicely! I have an application now where I will use two modules talking to eachother and transferring 2 digital inputs over a distance of 1km through tough terrain (trees,...).
Initial tests show that the connection is possible.
I'll get back to You, with information or maybe also some wishes for additional functionality if needed. :) I just wanted to reach back and say Thank You!
BR, Edvard
Dear Edvard,
Did you have success with this application?
I'm thinking about doing this installation very similar to what you were talking about.
Hi, I have already installed the FW 1.3.4 and I have connection between both LT-22222-L. With the serial screen I can check the message and it works fine. But I have this trouble, the LT-22222-L keep the DI1 and DI2 leds on since I turn on the LT-22222-L and doesn't change, I don't know if I have to connect something special to the DI1+, DI1-, DI2+ and DI2- ports.
Could you help me with some advice please?
