Can't Boot

Question

Can't Boot

Closed this issue 5 years ago · 8 comments

Having trouble booting at all with this EFI. I can't even get to the installer, it just kernel panics. Installer contain macOS Mojave 10.14.6. It's been a while since I've done this but I couldn't get anything valuable from the kernel panic log.

Answer 1 · 2019-08-20T06:03:22.000Z

can you give any detail info? such as, hardware info

Answer 2 · 2019-08-21T18:58:44.000Z

Yoga 730 13"
i5 8250U
UHD 620
8GB RAM
Stock 256GB Drive

Answer 3 · 2019-08-21T19:14:26.000Z

I usually build the efi from scratch but I figured I would use this since it was done and I was in a rush. Was this efi built for different specs?

Answer 4 · 2019-08-23T03:06:39.000Z

I don't really have time to do this so I was hoping I could use your efi. If not let me know and I'll make time to build one. Thx.

Answer 5 · 2019-08-23T11:19:55.000Z

still waiting for more info detail.

Answer 6 · 2019-08-23T11:21:04.000Z

Disable Security -> Intel SGX -> Intel SGX Controller
Disable Security -> Secure Boot
Switch RAID to AHCI in Configuration -> SATA Controller Mode

Answer 7 · 2019-08-23T11:40:08.000Z

I did that. It ended up being voodooi2c and voodooi2chid. When I removed them the computer booted. Installer wouldn't load with them. Once I installed Mojave I put them back in clover and it boots now. Just can't get touchpad or touchscreen to work. I've rebuilt kextcache but nothing.

Answer 8 · 2019-08-23T11:58:50.000Z

nvm its magically working now. weird.