请教一下在vscode调试下载的问题
Opened this issue · 2 comments
zgjsntsm commented
您好,目前在按照大佬提供的模板已经编译成功;想请教一下在vscode下该如何配置调试与下载
dreamcmi commented
首先非常抱歉回复晚了,最近在忙学业。
vscode下载可以使用tasks.json功能 以下我分享一个示例
{
"version": "2.0.0",
"tasks": [
{
"label": "build",
"type": "shell",
"command": "./build.bat",
},
{
"label": "flash",
"type": "shell",
"command":[
"C:/IDE/MounRiver/MounRiver_Studio/toolchain/OpenOCD/bin/openocd.exe -f C:/IDE/MounRiver/MounRiver_Studio/toolchain/OpenOCD/bin/wch-riscv.cfg -c init -c halt -c 'program ./build/ch32v203-ninja.hex' -c exit"
]
}
]
}
接下来是调试部分,推荐使用cortex-debug
插件,配置一下lunch.json (PS:推荐插件版本1.6.0 高版本会检查gdb版本大于等于9,而沁恒给的版本是8,会导致不能调试)
{
"version": "0.2.0",
"configurations": [
{
"name": "cortex-debug",
"type": "cortex-debug",
"request": "launch",
"armToolchainPath": "C:\\IDE\\MounRiver\\MounRiver_Studio\\toolchain\\RISC-V Embedded GCC\\bin",
"toolchainPrefix": "riscv-none-embed",
"servertype": "openocd",
"cwd": "${workspaceFolder}",
"runToMain": true,
"executable": "./build/ch32v203-ninja.elf",
"device": "CH32V203",
"svdFile": "CH32V203xx.svd",
"configFiles": [
"C:\\IDE\\MounRiver\\MounRiver_Studio\\toolchain\\OpenOCD\\bin\\wch-riscv.cfg"
]
}
]
}
zgjsntsm commented
感谢答复,我尝试一下。