eCrowneEng/ESP-SimHub

Simhub Timeout

stevienc opened this issue · 2 comments

stevienc commented

Not sure if this was tested on more than one MCU, but i've tried two different variations and two different computers and neither worked.

Tried it on a few of these:
https://www.amazon.com/gp/product/B09F8JJS61/

I tried different configurations in the platformio.ini, different ports, different baud rates, different PCs, differnet board IDs (Nodemcu 0.9, v2, etc). different usb cables, ports, nothing works.. Platformio is able to flash the MCU, but Simhub fails on "Uploading.." with:

avrdude.exe: stk500v2_ReceiveMessage(): timeout

And if i select a different board on the Simhub list:

avrdude.exe: stk500_recv(): programmer is not responding
avrdude.exe: stk500_getsync() attempt 1 of 10: not in sync: resp=0x46

ecoreng commented

You don't upload this though simhub. You upload this through platformio.