edwin170/downr1n

SystemError: PY_SSIZE_T_CLEAN macro must be defined for '#' formats

FireIceUwU opened this issue · 2 comments

FireIceUwU commented

Archlinux, Python 3.11.6, iPhone 6s

[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
bind(): Address in use
Error creating socket for listen port 2222: Address in use
[*] Waiting for the ramdisk to finish booting
libusb: warning [op_get_configuration] device unconfigured
libusb: error [op_get_active_config_descriptor] device unconfigured
[20:35:13.874][3] Could not get old configuration descriptor for device 3-90: LIBUSB_ERROR_NOT_FOUND
[20:35:13.878][3] Connecting to new device on location 0x3005a as ID 2
[20:35:13.928][3] Connected to v2.0 device 2 on location 0x3005a with serial number ramdisk tool Sep 18 2022 20:14:43
[20:35:13.929][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[20:35:13.930][2] device_control_input: Got unhandled payload type 5
[*] Mounting filesystems ...
[*] Dumpped SHSH
[*] Checking device version
the version that the device is currently in is 15.2.1
[*] extracting kernel ...
SystemError: PY_SSIZE_T_CLEAN macro must be defined for '#' formats

How to fix?

FireIceUwU commented

See []#63 (comment)

Thank you!