Waveshare Pico-Lora-sx1262-868m compatibility
Closed this issue · 5 comments
I've picked up a few of these items:
https://www.waveshare.com/pico-lora-sx1262-868m.htm
And wonder if it would be compatible with this library, since I'd prefer to program them in micropython.
And if so -- what the sx1262 constructor would be.
I believe based on the example in Ping Pong...
sx = SX1262(spi_bus=1, clk=10, mosi=11, miso=12, cs=3, irq=20, rst=15, gpio=2)
that the pinout would be as follows, but I'm unsure of the ?? items.
spi_bus : SPI bus ID ??
clk : SPI CLK pin gp10 ( clock )
mosi : SPI MOSI pin gp11
miso : SPI MISO pin gp12
cs : NSS pin ( gp3 - chip select? )
irq : DIO1 pin gp20 - DIO1
rst : RESET pin gp15 - RESET
gpio : BUSY pin gp2 -BUSY
Is the SPI BUS the PICO's SPI # for pin 11/12 ( aka 1 ) ?
I look forward to your response.
Sorry, I don't have the Waveshare Pico SX1262 and Pico board to try, but based on previous closed issues, this library should be compatible with the Waveshare LoRa board. The default constructor in Ping Pong example should be the correct one.
Units arrive in the next day or so.
Will let you know.
That other issue definitely helps. Thank you.
iam currently also working with the waveshare board. i would like to connect it with the the things network.
where does AppEUI and AppKey come into play/configuration?
This library does not support LoRaWAN, it only allows you to handle raw LoRa communication.
Wanted to share that I got Ping/Pong set up with two of the Waveshare SX1262 Pico Lora Hats on a pair of RPi Picos.
You can add it to your compatibility list. :)