ERR_SPI_CMD_TIMEOUT while using ai thinker ra-01

[supreeet]

I can't get ra 01 to work with micropython i'm a beginner and need help
I just want to get some sensor data one way from a drone

from sx1268 import SX1268
import time
from machine import Pin

sx = SX1268(spi_bus=1, clk=10, mosi=11, miso=12, cs=9, irq=27, rst=26, gpio=15)

LoRa

sx.begin(freq=433)

FSK

##sx.beginFSK(freq=923, br=48.0, freqDev=50.0, rxBw=156.2, power=-5, currentLimit=60.0,

preambleLength=16, dataShaping=0.5, syncWord=[0x2D, 0x01], syncBitsLength=16,

addrFilter=SX126X_GFSK_ADDRESS_FILT_OFF, addr=0x00, crcLength=2, crcInitial=0x1D0F, crcPolynomial=0x1021,

crcInverted=True, whiteningOn=True, whiteningInitial=0x0100,

fixedPacketLength=False, packetLength=0xFF, preambleDetectorLength=SX126X_GFSK_PREAMBLE_DETECT_16,

tcxoVoltage=1.6, useRegulatorLDO=False,

blocking=True)

while True:
msg, err = sx.recv()
if len(msg) > 0:
error = SX1262.STATUS[err]
print(msg)
print(error)