el1n/OpenWRT-package-softether

Error compile on 14.07 ramips

Opened this issue · 3 comments

lantsing commented

Applying ./patches/200-add-rc-openwrt.patch using plaintext:
patching file rc/vpnbridge
patching file rc/vpnclient
patching file rc/vpnserver
touch /home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529/.prepared_58477cf31ade2fe0285540c48051813a
rm -f /home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529/.configured_
touch /home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529/.configured_
make -C /home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529 -f src/makefiles/linux_32bit.mak src/bin/BuiltHamcoreFiles/unix/hamcore.se2
make[4]: Entering directory /home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529' cc -DNDEBUG -DVPN_SPEED -DUNIX -DUNIX_LINUX -D_REENTRANT -DREENTRANT -D_THREAD_SAFE -D_THREADSAFE -DTHREAD_SAFE -DTHREADSAFE -D_FILE_OFFSET_BITS=64 -I./src/ -I./src/Cedar/ -I./src/Mayaqua/ -O2 -fsigned-char -c src/Mayaqua/Cfg.c -o tmp/objs/Mayaqua/Cfg.o In file included from src/Mayaqua/Cfg.c:125:0: ./src/Mayaqua/Mayaqua.h:285:31: fatal error: readline/readline.h: No such file or directory #include <readline/readline.h> ^ compilation terminated. make[4]: *** [tmp/objs/Mayaqua/Cfg.o] Error 1 make[4]: Leaving directory/home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529'
make[3]: *** [/home/smarthon/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/v4.14-9529/.built] Error 2
make[3]: Leaving directory /home/smarthon/openwrt/feeds/SoftetherVpn/softethervpn' make[2]: *** [package/feeds/SoftetherVpn/softethervpn/compile] Error 2 make[2]: Leaving directory/home/smarthon/openwrt'
make[1]: *** [/home/smarthon/openwrt/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/stamp/.package_compile] Error 2
make[1]: Leaving directory `/home/smarthon/openwrt'
make: *** [world] 错误 2
smarthon@Smarthon-PC:~/openwrt$

el1n commented

u need install the readline headers.

its not for openwrt.
use package mngr for your distribution.

fededim commented

I have the same problem, but I did not understand if

  1. the "readline-dev" package should be installed in the host distribution (e.g Debian, Ubuntu, ecc.) or
  2. the "readline-dev" package should be installed in the toolchain distribution

From what you said it seems case 1), even though it does not make sense since the include headers are taken from openwrt toolchain.

Well, against all odds, everything worked fine after installing the package in the host, even though I can't understand why. In any case thank you.

alberts-s commented

@fededim
Readline must be installed in the router and in the host. But if the error is when compiling it is because host distribution lacks it.
sudo apt-get install -y subversion make gcc g++ libncurses5-dev libghc-zlib-dev libreadline-dev libssl-dev gawk bzip2 patch xz-utils git unzip

Doubt that the time fixing it would be worth it, but if you want to I can look into it later this month :)

By the way, if you're looking for specific packages I have a daily cronjob which compiles newest packages. http://vpslv.tirlins.com/openwrt/packs/ If you're looking for a specific architecture I can add it.