8x8 cross-point switch
Opened this issue · 2 comments
micbeldyga commented
Initial specification:
- 8x TTL compatible input via SMA. Selectable 50Ω termination with LED indicator
- 8x TTL compatible output via SMA
- cross-point switch configuration - every input can be routed to every output
- Total jitter shouldn't exceed 1ps
- DIOT/EEM form factor, max 6HP
- cross-point switching control via DIOT backplane or dedicated USB.
gkasprow commented
@micbeldyga There is missing SMA connector mezzanine design
micbeldyga commented
@micbeldyga There is missing SMA connector mezzanine design
Yes, I’m aware. I wanted to align on a main board design first before I start with the mezzanine, which won’t take longer than few hours to design