FMC_SDR IC6 AD9364
tprzywoz opened this issue · 0 comments
tprzywoz commented
-
TX/RX_EXT_LO_IN: "When this pin is unused, tie it to ground". Now they are floating (no connection on FMC_SDR_XFE board)
-
RXB_P/N "Unused pins must be tied to ground". Now they are floating.
-
TXB_P/N "Unused pins must be tied to 1.3 V". Now they are floating.
-
There is double connection to FMC of SYNC_IN signal. Is this intentional?
-
RXA / TXA to RF Transformers: For TX signal negative one is connected to Secondary Dot pin, for RX it is positive. Is this intentional? On devkit they keep negative to secondary dot connection for both.