Incognito hanging on mariko devices
Ryuuhou opened this issue · 7 comments
Mariko console hangs on Switch logo after applying incognito until prodinfo is restored.
This is the same issue exosphere blanking had in the beginning since it copied blawar's incognito. I assume yours is also a copy of blawar's incognito which blanks an important key required for newer marikos to boot.
Atmosphere-NX/Atmosphere@f051f70
^ the above documents the key that cannot be blanked
TODO: Remove incognito feature as it's now obsolete and dangerous.
Instead, user should apply cal0's blanking via Exosphère.
Exosphere prodinfo blanking has nothing to do with blawars. They work VERY differently.
Not being able to apply incognito aside from possibly exosphere on Mariko systems is well known in the scene, and any decent guide will warn you about this.
actually exosphere blank was based off incognito and worked identically until it was changed for mariko devices
TODO: Remove incognito feature as it's now obsolete and dangerous. Instead, user should apply cal0's blanking via Exosphère.
I would prefer something more permanent, could you think about modifying it to match exosphere?
Exosphere does it on the fly, so it may not be possible to do it to the raw image in the same way, not sure though
Ok, I'll see what I can do to keep this feature and add support for mariko.
I don't have a mariko unit. Can someone test this build please ?
https://drive.google.com/file/d/1ec3yc3wToemKppm0Ltu2fg-8hxeOyuvW/view?usp=sharing
I don't have a mariko unit. Can someone test this build please ? https://drive.google.com/file/d/1ec3yc3wToemKppm0Ltu2fg-8hxeOyuvW/view?usp=sharing
I will test when I get home,~7-8 hrs from now. Thank you!
Tested and it works! Thank you for deciding to support mariko