espressif/esp-at

Issues

• Documentation error for AT+CWLAPOPT command

  #875 opened 3 days ago by JavierReyes945
  0

• BLE broken pipe unrecoverable

  #813 opened 6 months ago by mrx23dot
  2

• Is it possible to disable some GATTS using at.py Tool GATTS Configuration?

  #816 opened 6 months ago by hamonika00
  4

• Enabling flash encryption with ESP-AT result in a missing partition error.

  #818 opened 6 months ago by charmed12
  1

• ESP32-C6 AT Firmware v4.0.0.0 does not support write no reponse command as BLE client

  #840 opened 4 months ago by xinkunlong
  1

• ESP32-C6 AT Firmware v4.0.0.0 AT+BLEGATTCWR which write data length cannot exceed 20

  #841 opened 4 months ago by xinkunlong
  1

• esp32 c3 wroom 02 run to at commands with doclight (IDFGH-13240)

  #855 opened 2 months ago by russianbearx
  3

• send AT+MQTTPUB once, topic receive two packets

  #873 opened 8 days ago by LeeGartu
  0

• Guru Meditation Error: Core 0 panic'ed (LoadProhibited)

  #872 opened a month ago by mdeloof
  1

• Add command to return BT Classic MAC address

  #850 opened 23 days ago by JHedgesBartec
  2

• BLE Scan Window Ignored, BLESCANPARAM

  #857 opened 2 months ago by Peter-B4321
  5

• Persistent Bonding not working consistently on ESP32-C6-DevKitM-1

  #859 opened 2 months ago by JavierReyes945
  2

• Cannot enable/disable DHCP for Wifi in ESP32C6

  #864 opened 24 days ago by JavierReyes945
  2

• AT 固件 BLE 连接断开原因

  #829 opened 5 months ago by ceerqingtingml
  3

• AT+HTTPCGET binary mode problem with newlines

  #860 opened a month ago by ringtailsoftware
  4

• at.py gatt config argument parsing bug

  #865 opened a month ago by benjaminaxiles
  0

• ESP32 C3 MINI Build Error

  #842 opened 2 months ago by Aravind0812
  5

• +CWLAP Response contains brackets which break the API convention

  #856 opened 2 months ago by JHedgesBartec
  3

• No response when using battery power supply

  #861 opened 2 months ago by Xellosi
  2

• +BLESCANDONE can be sent many times at the end of a scan

  #862 opened 2 months ago by JHedgesBartec
  0

• Add support for BLE SPP normal transmission mode

  #858 opened 2 months ago by JHedgesBartec
  2

• ESP-AT does not build for ESP32-WROOM with BT Classic enabled on release v3.4.0.0

  #848 opened 2 months ago by JHedgesBartec
  2

• Linux driver for ESP32 AT

  #809 opened 2 months ago by mike-2020
  2

• In classic Bluetooth mode, the module will still have no data downstream, and the module will automatically recover, but the time is too long, which takes 1 to 2 minutes

  #808 opened 2 months ago by aithinker2222
  2

• AT+BLESCAN error, with name/mac filter. release/4.0.0.0 with ble command support

  #815 opened 2 months ago by F1RST1
  5

• Using UART0 on default pins

  #854 opened 3 months ago by RM-ZAXIS
  1

• When using Ethernet, esp32 wroom cannot enter sleep mode.

  #853 opened 3 months ago by charon22
  0

• Packet loss in TCP

  #828 opened 5 months ago by venkateshdhara
  4

• How does modem wake up from light sleep mode.

  #832 opened 4 months ago by EdwardRyu
  5

• Ethernet + SPI (W5500) commands

  #852 opened 3 months ago by pedrorovi
  1

• AT+SYSMSG=0 does not disable WiFi connection related messages

  #844 opened 4 months ago by BornaBiro
  3

• Unclear documentation ESP-AT flash process for modified bin

  #851 opened 3 months ago by JavierReyes945
  1

• Multiple +BTENCDEV responses not separated with new lines

  #847 opened 3 months ago by JHedgesBartec
  3

• AT+HTTPCPOST after data transmission does not give SEND OK/ SEND FAIL

  #846 opened 4 months ago by Daphne-HU
  1

• Build fails with Secure Simple Pairing (SSP) disabled

  #849 opened 3 months ago by JHedgesBartec
  1

• Writing GATT characteristic with variable size will result in characteristic being truncated

  #819 opened 4 months ago by jnstahl
  3

• ESP32-C6 AT Firmware v4.0.0.0 does not support write no reponse command as BLE client

  #839 opened 4 months ago by xinkunlong
  0

• Add connectable property to BLE Scan result

  #812 opened 6 months ago by mrx23dot
  4

• AT command answer too fast loosing start characters

  #831 opened 4 months ago by cjoecker
  6

• How to switch to SSL in an open TCP connection

  #833 opened 4 months ago by FalconMuc
  7

• AT+MDNS does not produce the expected record

  #810 opened 7 months ago by SeraphimlabsLLC
  1

• ESP32 WROOM v3.2.0.0 release does not build

  #835 opened 4 months ago by JHedgesBartec
  1

• AT Firmware does not build when using Bluedroid for ESP32-C6

  #821 opened 4 months ago by JHedgesBartec
  3

• Is the WT32-S1 still supported?

  #825 opened 5 months ago by shawty
  6

• Disabling the default AP with SSID of esp_xxxxxx

  #826 opened 5 months ago by fahirad
  2

• No way to get HTTP Error code

  #827 opened 5 months ago by Rsaliu
  1

• hello，ESP32C3 AT+RFPOWER指令设置BLE从机的发射功率设置失败，看起来和[Neslon07](https://github.com/Neslon07)提出的issue很像，使用的是esp-at v3.2.0.0版本的代码。

  #823 opened 5 months ago by woaijiaohaer
  1

• ESP32-WROVER-32-AT-V2.4.0.0 firmware cannot connect to Azure IOT hub.

  #806 opened 6 months ago by zh0903
  4

• Cannot build due to WARNING: Component "espressif/mdns" not found

  #814 opened 6 months ago by veso266
  3

• Allow BLE deinit

  #811 opened 6 months ago by mrx23dot
  2