/xc16plusplus

Unofficial C++ compiler for PIC24/dsPIC chips, based on XC16 source code

Primary LanguagePythonGNU General Public License v3.0GPL-3.0

XC16++ release repository

Unofficial C++ compiler for PIC24 and dsPIC chips, based on the official XC16 compiler from Microchip. It is neither endorsed nor supported in any form by Microchip.

Download

Precompiled packages are available. They contain some executables that can be added to an existing XC16 installation to enable the C++ language (choose the one that matches your XC16 version and operating system). Precompiled XC16++ executables can be downloaded at https://github.com/fabio-d/xc16plusplus/releases.

Installation instructions are provided below in this document.

This project is based on Microchip's official source code (available at Microchip's MPLAB-XC website under the Downloads Archive tab). Full source code of the C++ compiler executables (i.e. source code from Microchip, with some patches to enable C++ support) can be found in the xc16plusplus-source repository (there is one branch for each supported XC16 version).

About XC16 (the official Microchip compiler)

The official XC16 compiler is actually a modified gcc version targeting PIC24 and dsPIC chips. In fact, the XC16 distribution also includes some proprietary software; however, since gcc is a GPLv3 project, the XC16 compiler sources are also covered by the GPLv3. They can be downloaded from Microchip's website (see previous section). The only officially supported language is C but, given that gcc also supports C++, it is possible to recompile it with a different set of configuration flags and enable the C++ frontend too!

It actually takes a little more effort to obtain a working C++ compiler, and this project hosts some patches and auxiliary files to make it possible.

Note that it is not possible to ship a stand-alone C++ compiler that does not require an existing XC16 installation, because some Microchip-supplied header files, software libraries, linker scripts and even some pieces of the compiler pipeline are proprietary.

Installation

If you download a precompiled XC16++ package, you will find the following files in its bin/bin subdirectory:

  • coff-cc1plus (Linux and OS X) or coff-cc1plus.exe (Windows)
  • coff-g++ (Linux and OS X) or coff-g++.exe (Windows)
  • elf-cc1plus (Linux and OS X) or elf-cc1plus.exe (Windows)
  • elf-g++ (Linux and OS X) or elf-g++.exe (Windows)

They must be copied to the bin/bin directory of an existing XC16 installation. The default path is (assuming XC16 version 1.24):

  • /opt/microchip/xc16/v1.24/bin/bin (Linux)
  • C:\Program Files (x86)\Microchip\xc16\v1.24\bin\bin (Windows)
  • /Applications/microchip/xc16/v1.24/bin/bin (OS X)

If you download a Linux or OS X package, the bin and bin/bin directories in the package also contain some symbolic links that must be copied to the corresponding XC16 installation directory, along with the main executables:

  • bin/xc16-cc1plus (symlink to xc16-cc1)
  • bin/xc16-g++ (symlink to xc16-gcc)
  • bin/bin/coff-paplus (symlink to coff-pa)
  • bin/bin/elf-paplus (symlink to elf-pa)

On Windows, you have to copy those files, instead of symlinking them. Therefore, no symbolic links are included in Windows packages. Instead, a bin\create_xc16plusplus_symlinks.cmd is provided, which can be copied to XC16's bin directory (the outer one, not bin\bin!) and run as Administrator to automatically copy the necessary files directly on the target system. After creating the copies, the script will show a confirmation message. You can delete it afterwards.

Building XC16++ from source

There are several ways to build XC16++, as documented in the BUILDING.md file.

Limitations

  • There is no libstdc++. Therefore, all C++ features that rely on external libraries are not available:
    • No std::cout / std::cerr
    • No STL
    • No exceptions
    • No RTTI (runtime type identification), e.g. typeid and dynamic_cast cannot be used
  • Extended data space (EDS) is only partly supported. In particular, objects cannot be placed in EDS memory (because this is a 16-bit data pointer).
  • Some EDS definitions that are valid in C are not supported in C++ parser, such as the following example:
// This syntax, which is valid C code, does not compile in XC16++
int * __psv__ psv_pointer_to_int __attribute__((space(psv)));

// You can use this equivalent snippet, which is accepted by XC16++
typedef int *intstar;
intstar __psv__ psv_pointer_to_int __attribute__((space(psv)));
  • If your code uses pointers to variables/objects allocated in the stack, make sure that your stack is located in the low 32K region (the --local-stack linker option, enabled by default, does exactly this).
  • The legacy C library (i.e. compiler option -legacy-libc) is not supported. If your XC16 version is between 1.25 and 1.70, where -legacy-libc is the default, make sure you set the -no-legacy-libc compiler option. Starting from version 2.00 the options -legacy-libc and -no-legacy-libc are no longer supported, because the compiler will always use a new library to support the C99 standard.

Some tips

  • Include example-project/minilibstdc++.cpp with your project (even if you do not use dynamic memory allocation), otherwise some symbols will not be resolved successfully by the linker.
  • Always compile C++ code with -fno-exceptions and -fno-rtti to avoid compiling code that relies on unsupported C++ features.
  • Define macro __bool_true_and_false_are_defined before including stdbool.h, so that it will not attempt to redefine such native C++ keywords. It is a good idea to define it on the command line with the -D__bool_true_and_false_are_defined compiler option.
  • C symbols referenced from C++ code will not be resolved correctly unless they are marked as extern "C".
  • Interrupt service routines written in C++ must be marked as extern "C" too, for instance:
extern "C" void __attribute__((__interrupt__, __auto_psv__, __shadow__)) _T1Interrupt(void)
{
  // Put C++ code here
}

License

The compiler is subject to the original gcc license, i.e. GNU General Public License, version 3 or later. A copy of the GNU General Public License is attached (see file LICENSE-GPL3.txt).

Please note that the GPL does not extend to programs compiled by XC16++, whose licensing terms are entirely up to the user. You will probably want to link your firmware against Microchip's support libraries (libc, libm, ...), that have their own licensing terms (see XC16's license).

The automatic tests (autotests/ subdirectory) are released under the same license as the compiler: GNU General Public License, version 3 or later.

The build scripts (build-scripts/ subdirectory) and the example project (example-project/ subdirectory) are released to public domain, under the terms of the "UNLICENSE" (see file LICENSE-UNLICENSE.txt).